DJI-NAZA-GPS
- DJI-Innovations GPS Module For NAZA Controller
New! DJI-Innovations GPS Upgrade Module for DJI-NAZA-M Controller
NAZA GPS Module Packs Rich Features Such as RTH (Return to Home) and IOC (Intelligent Orientation Control) and Low Battery Warning to name a few. Delivering a High Performance to Price Ratio for our Customers. ETA June 12th 2012.
DJI-Innovations NAZA Lite MULTI-ROTOR Flight Controller
DJI-NAZALITE
- DJI-Innovations NAZA Lite MULTI-ROTOR Flight Controller
New! DJI-NAZA Lite Multi-Copter Flight Controller
The DJI-NAZA Lite Flight Controller is based on a brand new core design, allowing a single light weight and small package delivering flight stabilization for multi-rotors. Controller, Gyros and barometer sensor are housed in a single unit with S-Bus support. This new platform allows demanding hobbyists the most versatile; plug and play, with patented internal shock sensor and reliability for fun and sport flying unlike others in the market. DJI proprietary navigational and control algorithms continue to be the best in providing excellent flight stability, highly accurate calibration of inertial locking feature to support dual-axis-gyro with PTZ control interface. NAZA will have firmware update and upgrade for future expansion.
The DJI-NAZA Lite Controller Currently Supports the Following Functions:
• Hexa, and Hexa-X • Quad + and Quad X • Camera Gimbal Stabilization • Dimensions: 45mm L x 32mm W.
Dimensions: • Main Controller 61mm x 39.6mm x 15.8mm • IMU: 40mm x 31mm x 26mm • GPS and Compass: 50mm x (diameter) x 9mm • LED Indicator: 25mm x 25mm x 7mm
E1001
- FC1212-S XAircraft Standard Flight Controller
FC1212-S XAircraft Standard Flight Controller The FC1212-S Flight Controller processes input RC signals and achieves series of fly movements by flight control algorithm and controls camera mount or shutter and so on. FC is mainly to control XAircraft flight attitude and heading, which is completed through specs below necessarily.
1. Receive RC signal, that is XAircraft control signal on throttle, pitch roll and yaw. It actually reflects the attitude users want to be showed on XAircraft which FC can do that, called expected attitude. 2. Calculate quadcopter real attitude from AHRS that is compliant to expected attitude. 3. If not, you have to calculate the four motors next rotation rate by flight control algorithm to alter blades rotation rate. It will change attitude to expect.
FC repeats the steps above to keep XAircraft fly stable and enable to do some fly stunts like funnel, fly in a figure 8 or loop/rolls.
XAircraft provides aeromodell enthusiasts a platform for aerial photography and aerial videography. It is also very important to control camera mount (Pan/Tilt) besides fly XAircraft stably and do fly stunts, XAircraft FC1212-S Flight Controller can do the camera mount stability augment control and shutter motion.
Additionally, FC1212-S has 5 electronic device link ports (PortA to PortE) which can be connected to standard configuration AHRS-S as well as expandable accessories like GPS, LED Module and so on. It makes XAircraft have a good upgrade ability and expansion area. RC model is a personalized sport, and users can adjust and set parameters by XAircraft Configuration Software to make XAircraft have higher flexibility and personalized setting.
X650 (AHRS) Attitude & Heading Reference System
E1004
- X650 (AHRS) Attitude & Heading Reference System
AHRS: • Provides real-time flight attitude and heading data for flight stability • 3-axis gyroscope • 3-axis acceleration sensor • Optional 3-axis magnetic field sensor • Output: Euler angles (Pitch, Roll, Yaw) (units deg), 3-axis angular velocity (in deg/s), 3-axis acceleration (in g)
X650 Compass
E1012
- X650 Compass
Compass: Compass is constituted with a 3-axis geomagnetic sensor. AHRS can read data geomagnetism related from Compass after it's connected to AHRS.
AHRS can calculate the heading relative to earth's magnetic pole through this data, 3 degrees north by east for example. This heading can correct the gyro yaw drift to achieve heading lock.
Electronic compass installation: Electronic compass works the same as regular physical compass sensing the Earth's magnetic field. The difference is that the electronic compass output is the electronic compass signal.
On the electronic compass, there is a mark "Front" letter with triangle arrow, the arrow pointing north of the Earth's magnetic field, electronic compass output is 0 degrees.
When installing the Electronic compass, you need to note the following: 1: The electronic compass is sensitive to magnetic objects (such as magnets, motors, etc.). Electronic compass installation location must be away from these objects. 2: The electronic compass is sensitive to electrical current wire/cable, especially in high current conductors (such as the battery power lines, electrical lines, etc.). Electronic compass installation location must be away from electrical conductors. 3: The direction of the electronic compass "Front" triangular arrow and AHRS "Front" triangular arrow must be consistent. 4: the initial installation of an electronic compass, you need to calibrate the electronic compass. Each time after changing the installation position, the electronic compass should be re-calibrated.
X650 GPS Module
E1013
- X650 GPS Module
GPS Module: GPS Module is used to provide global positioning message and flight height for FC, it makes X650 Position Hold, Height Hold realizable and easy for the shoot. X650 can return automatically (Go Home) using GPS information with the help of Compass to prevent accidents from aircraft incapable of identify heading in a highly far distance.
Note: Price subject to change.
FYETECH FY-90Q DREAM FLYER QUAD COMBINATION GYRO/STABILIZER SYSTEM
FY-90Q
- FYETECH FY-90Q DREAM FLYER QUAD COMBINATION GYRO/STABILIZER SYSTEM
Introducing the FY-90Q Dream Flyer Quad Combination Gyro/Self Leveling Stabilizer System. We are now taking pre-orders at the introductory price of $172.00 (regular price $189.00). Works both in X-Mode and + (plus) Mode. In Stock 12/2/2010!
GAUI GU-344 QUAD FLYER GYRO
G-210344
- GAUI GU-344 QUAD FLYER GYRO
GAUI GU-344 QUAD FLYER GYRO Can be used in almost any Quad/UAV Platform.
The HoverflySPORT Plug-N-Fly flight control System
HF-SPORT-00001
- The HoverflySPORT Plug-N-Fly flight control System
New HoverflySport Fligh Control System
HoverflySport Flight Controller with Hovercore Includes:
• Pre-Programmed, with Free Software Updates • Unmatched Sability out-of-the-box • 100% Surface Mount Devices (SMD) • Parallel Processing Architecture • Multi-Platform: Quad (+ or X), Hex, Octo, Y6, X8 • Small Design: 50mm x 50mm (2.17in.) • Fits many Pre-Existing Frames • On Board USB Programming • Ultrasonic Sensor Option (altitude Hold) • Great for Indor or Outdoor Flight • Includes: (1) USB Cable, (4) Anti-vibration Mounting Grommets • Made in The USA!
The HoverFlyPro Plug-N-Fly Quadcopter flight control system.
HFT00001
- The HoverFlyPro Plug-N-Fly Quadcopter flight control system.
In Stock
The HoverFlyPro is a Plug-N-Fly Quadcopter flight control system.
Features:
• Pre-Programmed with FREE software updates • Unmatched stability out-of-the-box • State-of-the-Art ALL Digital sensors • Parallel processing architecture (x16) • Multi-Platform: Quad, Hex, Octo • Camera mount Tilt/Pan output • Small Design 2.75" x 2.75" • On board USB programming • On-Screen-Display (OSD) for video downlink • Altitude hold for nearly hands off flight • Auto leveling for ease of control • Limited Avaiability.
FlyCam AVR ISP Programmer v2.0
KK-AVR-ISPV2
- FlyCam AVR ISP Programmer v2.0
FlyCam AVR ISP Programmer v2.0 is a fast and reliable USB AVR programmer, and works directly with AVR Studio. It is recognized as a STK500 programmer and programs all AVRs. OS: Windows 7, Windows Vista, Windows XP Platform: STK500 Port: Auto (COM1 ~ COM9)
KK-MultiCopter Flight Controller Jumper Cable Set
KK-JCS
- KK-MultiCopter Flight Controller Jumper Cable Set
MultiCopter flight controller board/receiver Jumper Cable Set Jumper Cable Set 3P Cable x 1 1P Cable x 3 Note: Cables only. No board or receiver included.
KK Multicopter XCopter XXcontroller v1.5
KK-QX
- KK Multicopter XCopter XXcontroller v1.5
New From KK Multicopter QuadroXCopter Configuration Flight Controller V1.5
Description: • New Version is Equipped with Atmega168 Chip • The Atmega168 chip provide the extra storage for expanded firmware and a higher refresh rate • Hole distance: 45mm, 63.6mm • Industry Standard Board Size • Fully Completed SMD PCB with Gyros.
Coming April 2011.
KK Multicopter Y-6 XXcontroller v1.5
KK-Y6
- KK Multicopter Y-6 XXcontroller v1.5
New From KK Multicopter Y-6 Configuration Flight Controller V1.5
Description: • New Version is Equipped with Atmega168 Chip • The Atmega168 chip provide the extra storage for expanded firmware and a higher refresh rate • Hole distance: 45mm, 63.6mm • Industry Standard Board Size • Fully Completed SMD PCB with Gyros.
