AddictiveRC - Everything Radio Controlled
  Return to AddictiveRC Home Page Custom Built Multirotor UAV's ARF - Almost Ready to Fly Multirotor UAV's RTF - Ready to Fly Multirotor UAV's   AddictiveRC - 520-429-6493 Contact Us Online

Dragon Circuits Sparky Flight Controller Auto-Pilot

DC-Sparky-FC - Dragon Circuits Sparky Flight Controller Auto-Pilot

New! Dragon Circuits Sparky Flight Controller Auto-Pilot

Dragon Circuits would like to introduce the highly anticipated Sparky flight controller. We have taken this amazing flight controller designed by Peabody124 for Tau Labs and built it here in the USA using the same stringent inspection and manufacturing methods used for our aerospace and military customers. All the sensors in Sparky are genuine, no cloned sensors here. These two factors together equal the highest quality flight controller on the market today

Specs:

- GPS capable for functions such as RTH (Return To Home), Position Hold and Waypoint navigation in conjunction with a ground station.
- Mavlink compatible for the use of telemetry radios for use with a ground station to provide location information and waypoint navigation.
- 9 dof accelerometer / gyro for the absolute quickest and most accurate angle recognition and correction
- 2 serial ports
- PPM only – SBus Support and DSM2/x support with user selectable 3.3v or 5v setting.
- Camera stabilization output for 3 axis servo driven Gimbals.
- 10 channel outputs.
- Up to 3 adc inputs for rssi.
- Very compact design, perfect for small UAV’s where space is limited. Also excellent in larger machines as well.
- Weight: 6.9g with right angle header pins.
- 30mm x 30mm mounting pattern
- Available with 90 degree header pins and straight header pins for easy installation no matter what your frame requires.
- Taulabs ground station / firmware compatible.

Vehicle compatibility options include:

- Multirotor – Quad X, Quad +, Hex, Hex x, Hex Y6, Octo, Octo V, Octo Coax X, Octo Coax + Ground
- Car/Truck, Motorcycle, Tank Helicopter.
- CCPM, FP Fixed Wing.
- Standard (elevator, aileron, rudder), Elevon and VTail mixing Custom – mix your own settings for almost any vehicle.

For more info please visit: http://www.taulabs.org

Tau Labs Getting Started: Episode 1 - basic configuration for first flight from peabody124 on Vimeo.


Tau Labs Getting Started: Episode 2 - Advanced Calibration from peabody124 on Vimeo.


DC-Sparky-FC

$70.00
+ Plus Shipping

Qty.
Availability: Yes


DJI A3 PRO FLIGHT CONTROLLER (INCLUDES TWO ADDITIONAL COMPASSES & GPS RECIEVERS)











DJI-A3PRO - DJI A3 PRO FLIGHT CONTROLLER (INCLUDES TWO ADDITIONAL COMPASSES & GPS RECIEVERS)


DJI A3 PRO FLIGHT CONTROLLER (INCLUDES TWO ADDITIONAL COMPASSES & GPS RECIEVERS)

DJI A3 PRO FLIGHT CONTROLLER SET.

DJI-A3PRO

$1499.00
+ Plus Shipping

Qty.
Availability: YES


DJI-Innovations WKM Click & Go 50 Waypoint System


DJI-ClickandGo-50 - DJI-Innovations WKM Click & Go 50 Waypoint System
New! DJI Wookong-M 50 Point Waypoint Click and Go

Wookong-M Veiw 50 Waypoint Click and Go Activation Upgrade.
Click Go Mode is an upgrade package of WK-M View, which gives you an extra tool for flight operation.
This tool allows pilot to drag 50 point flight route on 3D map, assign altitude and flight speed to a single destination. Altitude, speed and destination point can be changed on-the-fly with flight path tracking.
Click Go Mode strengthens the WKM View, which brings you more exciting flight experience.
Please Note Software Runs on 32 Bit OS only.
Special Order Only!

DJI-ClickandGo-50

$1300.00
+ Plus Shipping

Qty.
Availability: Call


DJI-Innovations GPS Module For NAZA Controller

DJI-NAZA-GPS - DJI-Innovations GPS Module For NAZA Controller

New! DJI-Innovations GPS Upgrade Module for DJI-NAZA-M Controller

NAZA GPS Module Packs Rich Features Such as RTH (Return to Home) and IOC (Intelligent Orientation Control) and Low Battery Warning to name a few.
Delivering a High Performance to Price Ratio for our Customers.
ETA June 12th 2012.

DJI-NAZA-GPS

$169.00
+ Plus Shipping

Qty.
Availability: Good


DJI-Innovations NAZA Lite MULTI-ROTOR Flight Controller

DJI-NAZALITE - DJI-Innovations NAZA Lite MULTI-ROTOR Flight Controller
New! DJI-NAZA Lite Multi-Copter Flight Controller

The DJI-NAZA Lite Flight Controller is based on a brand new core design, allowing a single light weight and small package delivering flight stabilization for multi-rotors. Controller, Gyros and barometer sensor are housed in a single unit with S-Bus support.
This new platform allows demanding hobbyists the most versatile; plug and play, with patented internal shock sensor and reliability for fun and sport flying unlike others in the market. DJI proprietary navigational and control algorithms continue to be the best in providing excellent flight stability, highly accurate calibration of inertial locking feature to support dual-axis-gyro with PTZ control interface. NAZA will have firmware update and upgrade for future expansion.

The DJI-NAZA Lite Controller Currently Supports the Following Functions:

• Hexa, and Hexa-X
• Quad + and Quad X
• Camera Gimbal Stabilization
• Dimensions: 45mm L x 32mm W.

User Manuals
DJI NAZA Manual (NAZA_User_Manual_en.pdf)

Driver Files
DJI 32/64 bit USB Driver Download. (DJI_USB_Driver.zip)

DJI Download Site
DJI NAZA Download Site



DJI-NAZALITE

$109.00
+ Plus Shipping

Qty.
Availability: Good


DJI-Innovations NAZA Lite MULTI-ROTOR Flight Controller with GPS

DJI-NAZALSET - DJI-Innovations NAZA Lite MULTI-ROTOR Flight Controller with GPS
New! DJI-NAZA Lite Multi-Copter Flight Controller set with GPS

The DJI-NAZA Lite Flight Controller is based on a brand new core design, allowing a single light weight and small package delivering flight stabilization for multi-rotors. Controller, Gyros and barometer sensor are housed in a single unit with S-Bus support.
This new platform allows demanding hobbyists the most versatile; plug and play, with patented internal shock sensor and reliability for fun and sport flying unlike others in the market. DJI proprietary navigational and control algorithms continue to be the best in providing excellent flight stability, highly accurate calibration of inertial locking feature to support dual-axis-gyro with PTZ control interface. NAZA Lite will have firmware update and upgrade for future expansion.

The DJI-NAZA Lite Controller With GPS Currently Supports the Following Functions:

• Hexa, and Hexa-X
• Quad + and Quad X
• Camera Gimbal Stabilization

• GPS Hold
• Intelligent Orientation Control (IOC)
• Return to Home Function
• Dimensions: 45mm L x 32mm W.


DJI-NAZALSET

$209.00
+ Plus Shipping

Qty.
Availability: Good


New! DJI NAZA-M MULTIROTOR AUTOPILOT V2 W/GPS

DJI-NZMV2SET - New! DJI NAZA-M MULTIROTOR AUTOPILOT V2 W/GPS
ALL-IN-ONE DESIGN

DJI adheres to continuous innovation and improvement. With the new firmware, new attitude stabilization algorithm and optimized hardware structure, the Naza-M V2 provides better flight performance. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude and attitude and therefore can be used for autopilot/automatic control.


INDEPENDENT PMU WITH AMAZING FUNCTION EXTENSION

The Naza PMU V2 has enhanced BEC functionality and provides extendable CAN BUS ports, which can support iOSD, Zenmuse H3-2D gimbal (pitch control). Support is also included for optional Bluetooth LED module to allow parameter adjustment via a mobile APP (future firmware upgrade required for this functionality)




ADVANCED & IMPROVED ATTITUDE STABILIZATION ALGORITHM

The latest fourth generation attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability even without the GPS module. It is more flexible and stable, and gives the hobbyists a wonderful flight experience. New features have been included such as GPS course automatic compensation, GPS & Compass sensor calibration, new take-off mode and so on.


NINE TYPES OF MULTI-ROTORS SUPPORTED

Naza-M V2 now supports nine types of multi-rotor, which meets the different needs of the enthusiasts.
Quad I, Quad X;
Hexa I, Hexa V, Hexa Y, Hexa IY;
Octo X, Octo I, Octo V; ( Naza-M V2 does not support the aircraft which has large vibration, so when you choose to use hexa-rotor or octo-rotor, please use the vibration dampening devices accordingly.


MULTIPLE FLIGHT CONTROL MODES/INTELLIGENT SWITCHING

It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger.


GPS MODULE AVAILABLE/ACCURATE POSITION HOLD

The plug and play GPS module will greatly enhance the performance for Aerial Photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. With the GPS Module, the multi-rotor will have position and altitude locked accurately even in windy conditions. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical.


INTELLIGENT ORIENTATION CONTROL

Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction: In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 1)?

In home lock flying, the forward direction is the same as the direction from home point to multi-rotor. See the following figures (Mode 2)?


ENHANCED FAILSAFE MODE

If your transmitter supports failsafe, then you can set failsafe through port-U. Naza controller has built-in auto level failsafe function, which means when the communication between MC and the transmitter is disconnected, the outputs of all command sticks from controller will go to center position. If the GPS module is used, you can also set RTH on failsafe. If your transmitter has only 4 channels, then MC will work in Atti. Mode by default without the failsafe function.



TWO LEVELS OF LOW VOLTAGE PROTECTIONS

In order to prevent your multi-rotor from crashing or other harmful consequences caused by low battery voltage, we have designed two levels of low voltage protection. You can choose not to use this, however we strongly recommend you to enable the protection. Both levels of protection have LED warning as default. The first level will blink the red light continuously; the second level will blink red light continuously and the multi-rotor will descend and land. In manual mode when low voltage protection is triggered the LED warning will be active only.


MOTOR ARM AND MOTOR DIS-ARM

There are four ways to start the motors, see the following picture:

When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors.

Motor Disarm: There are two modes of Motor Disarm: namely Intelligent Mode and Immediate Mode. For more information, please refer to the user manual or DJI Wiki.

Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience in supporting double spring TX; every time you let go of the throttle stick it will hover.


PPM, S-BUS & ORDINARY RECEIVER SUPPORTED

Minimum Four channel receiver supported, also PPM and Futaba S-Bus receiver supported. PPM & S-Bus receivers (the general use of the first 8 channels of S-Bus receiver) to optimize the channel connection, the A, E, T, R, U five-channel functions are set using channel X2, use only one servo cable to connect the PPM or S-Bus to X2, this makes installation quick and easy.



INDEPENDENT LED MODULE

The Independent LED module makes the indication of the flight status and the system status to the ground much clearer. The pilot can get information more quickly and more conveniently, even at night, he/she can get real-time flight information feedback through the LED flashing frequency and colour. In addition, the module has a USB interface, which is used for parameter settings and firmware upgrade.




BUILT-IN GIMBAL STABILIZATION FUNCTION

The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the aircraft after setting the parameters the first time.






MULTI-ROTOR ONE-POWER OUTPUT FAIL PROTECTION

In most conditions, the whole multi-rotor will retain good attitude and rotate around the frame arm with no power output, due to imbalanced mechanical structure and external environment. Rotating is mainly caused by payload and external environment. When payload is heavier, rotating speed is faster. On rotating, the hexa-rotor physical structure can cause rudder to become out of control. This humanistic protection function from Naza-M V2, in Attitude or GPS Mode, keeps attitude under control even with any one power output failed and highly reduces crash risk.


REMOTE GAIN ADJUSTMENT

The default parameter settings are preset for you to achieve a normal flight, and also supports remote parameter adjustment by using a control slider on the TX during flight in order to obtain better performance.








NEW ASSISTANT SOFTWARE & FIRMWARE ONLINE UPDATE

The user interface of the assistant software has been comprehensively updated and brings you a new interaction experience. Instructions will automatically appear which is very convenient. In addition, on the left side of each menu section there is additional information. The logical design makes your parameter settings more simple and convenient. Like other DJI products the Naza-M V2 firmware can be upgraded free online.




DJI-NZMV2SET

$428.00
+ Plus Shipping

Qty.
Availability: Good


DJI-Innovations 900mhz WKM Data Link TX & RX and M-View


DJI-WK900mzDL - DJI-Innovations 900mhz WKM Data Link TX & RX and M-View
New! DJI WKM 900mhz Data Link and WKM-View

WKM 900mhz Data Link with M-view Software
As a Ground Control Station (GCS), WKM View enables DJI autopilot system WKM the ability to monitor real-time flight state. It is an advanced feature of WKM.
WKM View will display 3D Map, Monitor attitude, coordinate, Speed and angle of aircraft, Monitor Signal quality of wireless data link module and power voltage for you.
It is specially designed for high-end WKM users.
Please Note: Software runs on 32 bit OS only.
Special Order Only


DJI-WK900mzDL

$520.00
+ Plus Shipping

Qty.
Availability: Call


DJI WOOKONG-M MULTI-ROTOR AUTO-PILOT


DJI-WKM - DJI WOOKONG-M MULTI-ROTOR AUTO-PILOT

In Stock Now Shipping!
New! Industry Leading DJI Wookong-M Multi-Rotor Auto-Pilot
General Specs:

Built in Functions:
• Autopilot
• Auto Hover Fail Safe

Multi Rotor Types:
• Quad-Rotor
• Hex-Rotor
• Octo-Rotor
Supported ESC Output:
• 200HZ Refresh rate Frequencys

Recommended Transmitter:
• PCM or 2.4GHZ with 5 Channels Minimumand Failsafe on all Channels

Recommended Power Supply:
• DC 4.8v to 12v
• Power Module Included

Power Consumption:
• 5 watts Max
• 0.9amps at 5v
• 0.7amps at 5.8v
• 0.5amps at 7.4v
• 0.4amps at 8v

Operating Temperature:
• -5 degrees C to +60 degrees C

Hovering Accuracy:
• Vertical +- 0.5M
• Horizontal +- 2M

Suitable Wind Conditions:
• Up to 17.7mph

Maximum Rotational Angle:
• 30 degrees

Vertical Speed:
• 3 meters per second

Dimensions:
• Main Controller 61mm x 39.6mm x 15.8mm
• IMU: 40mm x 31mm x 26mm
• GPS and Compass: 50mm x (diameter) x 9mm
• LED Indicator: 25mm x 25mm x 7mm

User Manuals
DJI WooKong M User Manual (WooKong_M_User_Manual_en.pdf)

Driver Files
DJI 32/64 bit USB Driver Download. (DJI_USB_Driver.zip)

DJI Download Site
DJI NAZA Download Site




DJI-WKM

$1059.00
+ Plus Shipping

Qty.
Availability: Good


FC1212-S XAircraft Standard Flight Controller

E1001 - FC1212-S XAircraft Standard Flight Controller

FC1212-S XAircraft Standard Flight Controller
The FC1212-S Flight Controller processes input RC signals and achieves series of fly movements by flight control algorithm and controls camera mount or shutter and so on. FC is mainly to control XAircraft flight attitude and heading, which is completed through specs below necessarily.

1. Receive RC signal, that is XAircraft control signal on throttle, pitch roll and yaw. It actually reflects the attitude users want to be showed on XAircraft which FC can do that, called expected attitude.
2. Calculate quadcopter real attitude from AHRS that is compliant to expected attitude.
3. If not, you have to calculate the four motors next rotation rate by flight control algorithm to alter blades rotation rate. It will change attitude to expect.

FC repeats the steps above to keep XAircraft fly stable and enable to do some fly stunts like funnel, fly in a figure 8 or loop/rolls.

XAircraft provides aeromodell enthusiasts a platform for aerial photography and aerial videography. It is also very important to control camera mount (Pan/Tilt) besides fly XAircraft stably and do fly stunts, XAircraft FC1212-S Flight Controller can do the camera mount stability augment control and shutter motion.

Additionally, FC1212-S has 5 electronic device link ports (PortA to PortE) which can be connected to standard configuration AHRS-S as well as expandable accessories like GPS, LED Module and so on. It makes XAircraft have a good upgrade ability and expansion area. RC model is a personalized sport, and users can adjust and set parameters by XAircraft Configuration Software to make XAircraft have higher flexibility and personalized setting.

E1001

$155.00
+ Plus Shipping

Qty.
Availability: Low


X650 (AHRS) Attitude & Heading Reference System

E1004 - X650 (AHRS) Attitude & Heading Reference System

AHRS:
• Provides real-time flight attitude and heading data for flight stability
• 3-axis gyroscope
• 3-axis acceleration sensor
• Optional 3-axis magnetic field sensor
• Output: Euler angles (Pitch, Roll, Yaw) (units deg), 3-axis angular velocity (in deg/s), 3-axis acceleration (in g)

E1004

$179.99
+ Plus Shipping

Qty.
Availability: Low


X650 Compass

E1012 - X650 Compass

Compass:
Compass is constituted with a 3-axis geomagnetic sensor. AHRS can read data geomagnetism related from Compass after it's connected to AHRS.

AHRS can calculate the heading relative to earth's magnetic pole through this data, 3 degrees north by east for example. This heading can correct the gyro yaw drift to achieve heading lock.

Electronic compass installation:
Electronic compass works the same as regular physical compass sensing the Earth's magnetic field. The difference is that the electronic compass output is the electronic compass signal.

On the electronic compass, there is a mark "Front" letter with triangle arrow, the arrow pointing north of the Earth's magnetic field, electronic compass output is 0 degrees.

When installing the Electronic compass, you need to note the following:
1: The electronic compass is sensitive to magnetic objects (such as magnets, motors, etc.). Electronic compass installation location must be away from these objects.
2: The electronic compass is sensitive to electrical current wire/cable, especially in high current conductors (such as the battery power lines, electrical lines, etc.). Electronic compass installation location must be away from electrical conductors.
3: The direction of the electronic compass "Front" triangular arrow and AHRS "Front" triangular arrow must be consistent.
4: the initial installation of an electronic compass, you need to calibrate the electronic compass. Each time after changing the installation position, the electronic compass should be re-calibrated.

E1012

$60.00
+ Plus Shipping

Qty.
Availability: Good


X650 GPS Module

E1013 - X650 GPS Module

GPS Module:
GPS Module is used to provide global positioning message and flight height for FC, it makes X650 Position Hold, Height Hold realizable and easy for the shoot. X650 can return automatically (Go Home) using GPS information with the help of Compass to prevent accidents from aircraft incapable of identify heading in a highly far distance.

Note: Price subject to change.

E1013

$200.00
+ Plus Shipping

Qty.
Availability: Call


Holybro Race32 Racing Flight Controller F303 (Naze32 F3 w/Baro)


HB-11015 - Holybro Race32 Racing Flight Controller F303 (Naze32 F3 w/Baro)

New! Holybro Race32 Racing Flight Controller F303 (Naze32 F3 w/Baro)

Features:
- 36x36mm board with 30.5mm mounting holes
- Weight: 5 grams
- STM32F303 CPU with FPU 256kB flash
- 8MB (64Mbit) High-Capacity Flash
- MPU6050 accelerometer/gyro
- MS5611 barometer (Deluxe only)
- HMC5983 magnetometer (Compass Sensor, Deluxe only)
- Micro USB socket
- 2x 6pin JST-SH sockets (PWR,GPS/I2C)
- 3x 4pin JST-SH sockets (OSD/TELEMTRY,UART3/ SERIAL RX,LED,RSSI)
- 1x 8pin JST-SH sockets (PPM,PWM,5V,GND)
- 1x 10pin JST-SH sockets (ESC/Servo connections, 5V, GND)
- 4x 3pin though-holes for pin headers for ESC/Servo connections
- 1x 2pin though-holes for pin headers for buzzer
- 1x 3pin JST-ZH sockets (sat.DSM).

HB-11015

$39.99
+ Plus Shipping

Qty.
Availability: Yes


Holybro Rice32 Micro Racing Flight Controller (Naze32 F3 with baro)


HB-11016 - Holybro Rice32 Micro Racing Flight Controller (Naze32 F3 with baro)

New! Holybro Rice32 Micro Racing Flight Controller (Naze32 F3 with baro)

Features:
- 30x18mm board
- 5 grams
- STM32F303 CPU with FPU 256kB flash
- 8MB (64Mbit) High-Capacity Flash
- MPU6050 accelerometer/gyro
- MS5611 barometer (Deluxe only)
- HMC5983 magnetometer (Compass Sensor, Deluxe only)
- Micro USB socket
- 2x 6pin JST-SH sockets (PWR,GPS/I2C)
- 3x 4pin JST-SH sockets (OSD/TELEMTRY,UART3/ SERIAL RX,LED,RSSI)
- 1x 8pin JST-SH sockets (PPM,PWM,5V,GND)
- 1x 10pin JST-SH sockets (ESC/Servo connections, 5V, GND)
- 4x 3pin though-holes for pin headers for ESC/Servo connections
- 1x 2pin though-holes for pin headers for buzzer
- 1x 3pin JST-ZH sockets (sat.DSM).

HB-11016

$39.99
+ Plus Shipping

Qty.
Availability: Yes


The HoverflySPORT Plug-N-Fly flight control System

HF-SPORT-00001 - The HoverflySPORT Plug-N-Fly flight control System

New HoverflySport Fligh Control System

HoverflySport Flight Controller with Hovercore Includes:

• Pre-Programmed, with Free Software Updates
• Unmatched Sability out-of-the-box
• 100% Surface Mount Devices (SMD)
• Parallel Processing Architecture
• Multi-Platform: Quad (+ or X), Hex, Octo, Y6, X8
• Small Design: 50mm x 50mm (2.17in.)
• Fits many Pre-Existing Frames
• On Board USB Programming
• Ultrasonic Sensor Option (altitude Hold)
• Great for Indor or Outdoor Flight
• Includes: (1) USB Cable, (4) Anti-vibration Mounting Grommets
• Made in The USA!

HF-SPORT-00001

$200.00
+ Plus Shipping

Qty.
Availability: Low


The HoverFlyPro Plug-N-Fly Quadcopter flight control system.

HFT00001 - The HoverFlyPro Plug-N-Fly Quadcopter flight control system.

In Stock

The HoverFlyPro is a Plug-N-Fly Quadcopter flight control system.

Features:

• Pre-Programmed with FREE software updates
• Unmatched stability out-of-the-box
• State-of-the-Art ALL Digital sensors
• Parallel processing architecture (x16)
• Multi-Platform: Quad, Hex, Octo
• Camera mount Tilt/Pan output
• Small Design 2.75" x 2.75"
• On board USB programming
• On-Screen-Display (OSD) for video downlink
• Altitude hold for nearly hands off flight
• Auto leveling for ease of control
• Limited Avaiability.

HFT00001

$400.00
+ Plus Shipping

Qty.
Availability: Low


HYPERION F3 FLIGHT CONTROLLER DELUXE WITH COMPASS AND BAROMETER

HP-FCF3DLX - HYPERION F3 FLIGHT CONTROLLER DELUXE WITH COMPASS AND BAROMETER

New! HYPERION F3 FLIGHT CONTROLLER DELUXE WITH COMPASS AND BAROMETER

The Hyperion F3 Flight Controller with Altitude Sensor and Compass gives you all the features you want, whether you're into FPV racing, acrobatic flying or drone photography.
The F3 Flight Controllers next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and the ever faster ARM-Cortex M4 core capable of loops speeds 2x faster than other boards.
The Hyperion F3 Flight Controller builds on tried and tested software, processor and sensor technology to make your aircraft fly like it's on rails. The F3 Flight Controller also runs the open-source Cleanflight flight control (FC) software which has an ever-growing community of friendly developers and users. Being open-source means that you too can contribute to the system.
The No-Compromise I/O lets you use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!
Don’t let the size fool you, the tiny yet and lightweight Hyperion F3 Flight Controller has a standard 36x36mm form-factor with 30.5mm mounting holes and weighs just 6 grams.
With the built-in high-capacity black box flight log recorder allows you optimize your tuning and see the results of your setup without guesswork. Also included with the F3 Flight Controller is the developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
The F3 Flight Controller offers full support for OneShot ESCs for easy PID tuning and a sharper response.
The F3 Flight Controller Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).
The Programmable LED light functions gives you dedicated output for programmable LEDs - great for orientation, racing and night flying.
The F3 Flight Controller comes packed with other features such as battery monitoring ports for voltage and current, Sonar support for precision low-altitude hold, and a Buzzer port for audible warnings and notifications.
The F3 Flight Controllers I2C port always powered, perfect for external sensors or always-on OLED Screen.

HP-FCF3DLX

$41.99
+ Plus Shipping

Qty.
Availability: Yes


HYPERION BLUETOOTH ADAPTER FOR NAZE 32 FLIGHT CONTROLLERS



HP-FPFCBT - HYPERION BLUETOOTH ADAPTER FOR NAZE 32 FLIGHT CONTROLLERS

New! HYPERION BLUETOOTH ADAPTER FOR NAZE 32 FLIGHT CONTROLLERS

The functional and useful Hyperion bluetooth programming adapter module is used to configure your Multiwii flight controller wirelessly from your Android device. You will need to download the Multiwii Configuration Android app to your mobile device to use this module.
The Hyperion Bluetooth adapter is compatible with MultiWii, Naze32, and CC3D flight controllers.

HP-FPFCBT

$10.99
+ Plus Shipping

Qty.
Availability: Yes


Sky-Hero Open Pilot Mini CCD3D Flight Controller for FPV racing and Anakin

SKH04-010 - Sky-Hero Open Pilot Mini CCD3D Flight Controller for FPV racing and Anakin

New! Sky-Hero Open Pilot Mini CCD3D Flight Controller for FPV racing and Anakin
All Cables Included.

SKH04-010

$39.99
+ Plus Shipping

Qty.
Availability: Yes


Zero UAV Gemini Dual Redundancy Multi-Rotor Audo-Pilot FC System








ZT-Gemini-MS - Zero UAV Gemini Dual Redundancy Multi-Rotor Audo-Pilot FC System


New! Zero UAV Gemini Dual Redundancy Multi-Rotor Audo-Pilot FC System

ZT-Gemini-MS

$1599.99
+ Plus Shipping

Qty.
Availability: Yes


Zero UAV YS-X4 V2 Multi-Rotor Auto-Pilot









ZT-YSX4V2 - Zero UAV YS-X4 V2 Multi-Rotor Auto-Pilot

New! Zero UAV YS-X4 V2 Multi-Rotor Auto-Pilot

ZT-YSX4V2

$600.00
+ Plus Shipping

Qty.
Availability: Yes

© AddictiveRC LLC - All Rights Reserved | Website Development and Design by TYCOMM.NET