AddictiveRC - Everything Radio Controlled
  Return to AddictiveRC Home Page Custom Built Multirotor UAV's ARF - Almost Ready to Fly Multirotor UAV's RTF - Ready to Fly Multirotor UAV's   AddictiveRC - 520-429-6493 Contact Us Online
  Main Page | Members | Photos | Videos | Forum | Blogs | Chat | Events | Groups  

HP SILICONE 10AWG WIRE 1M

HP-SCWIRE10 - HP SILICONE 10AWG WIRE 1M

New! HYPERION HIGH QUALITY SILICONE WIRE. SET OF RED-BLACK, 1-METER 10AWG WIRE

HP-SCWIRE10

$12.00
+ Plus Shipping

Qty.
Availability: Yes


HP SILICONE 12AWG WIRE 1M

HP-SCWIRE12 - HP SILICONE 12AWG WIRE 1M

New! HYPERION HIGH QUALITY SILICONE WIRE. SET OF RED-BLACK, 1-METER 12AWG WIRE

HP-SCWIRE12

$7.50
+ Plus Shipping

Qty.
Availability: Yes


HP SILICONE 14AWG WIRE 1M

HP-SCWIRE14 - HP SILICONE 14AWG WIRE 1M

New! HYPERION HIGH QUALITY SILICONE WIRE. SET OF RED-BLACK, 1-METER 14AWG WIRE

HP-SCWIRE14

$4.99
+ Plus Shipping

Qty.
Availability: Yes


HP SILICONE 18AWG WIRE IM

HP-SCWIRE18 - HP SILICONE 18AWG WIRE IM

New! HYPERION HIGH QUALITY SILICONE WIRE. SET OF RED-BLACK, 1-METER 18AWG WIRE

HP-SCWIRE18

$2.99
+ Plus Shipping

Qty.
Availability: Yes


MayTech Multi-Rotor Power Distribution Board 160A

MT-PDB160 - MayTech Multi-Rotor Power Distribution Board 160A

New! MayTech Multi-Rotor Power Distribution Board
Concept:
This power distribution board makes wiring a whole lot easier. The board mounts inside the frame using small aluminum spacers and screws. Simply solder the speed controllers and lights directly to the board, and a battery lead to into two plated holes. The board lines up with existing center plate holes.

Specs:
- Size: 45x45x2mm
- Handles 20 Amps per channel (160amps total).

MT-PDB160

$16.95
+ Plus Shipping

Qty.
Availability: Good


Power Hungry Power Distribution Systems 10



PH-DS-10 - Power Hungry Power Distribution Systems 10

New! Power Hungry Power Distribution Systems-10

The Power Hungry power distribution system is the best choice when it comes to distributing power throughout your heavy lift multi-copter. It can safely handle up to 400AMPS without breaking a sweat, and you can fly with ease knowing reliable current is running though your aircraft. The Power Hungry system is made in the USA with high grade materials, and is individualy hand-soldered to ensure the best quality possible.

- Standard bolt pattern to fit Droidworx, Cinestar, MK.
- Capable of lifting more than 30 pounds of Amperage the system.
- Supports single and dual battery setups.
- Made from extremely conductive solid copper plates.
- Corrosion free.
- Each plate is Nickle plated then Gold plated for long protection and super high amp capabilities.
- Comes with 20 male 3.5mm bullet plugs for connecting ESCís.
- Complete with (4) 12 inch wire leads. Customized for longer wire on request.
- Allows for clean layout and trouble-free installation. No more messy wiring harnesses.

PH-DS-10

$290.00
+ Plus Shipping

Qty.
Availability: Low


Power Hungry Power Distribution Systems 8



PH-DS-8 - Power Hungry Power Distribution Systems 8

New! Power Hungry Power Distribution Systems-8

The Power Hungry power distribution system is the best choice when it comes to distributing power throughout your heavy lift multi-copter. It can safely handle up to 400AMPS without breaking a sweat, and you can fly with ease knowing reliable current is running though your aircraft. The Power Hungry system is made in the USA with high grade materials, and is individualy hand-soldered to ensure the best quality possible.

- Standard bolt pattern to fit Droidworx, Cinestar, MK.
- Capable of lifting more than 30 pounds of Amperage the system.
- Supports single and dual battery setups.
- Made from extremely conductive solid copper plates.
- Corrosion free.
- Each plate is Nickle plated then Gold plated for long protection and super high amp capabilities.
- Comes with 16 male 3.5mm bullet plugs for connecting ESCís.
- Complete with (4) 12 inch wire leads. Customized for longer wire on request.
- Allows for clean layout and trouble-free installation. No more messy wiring harnesses.

PH-DS-8

$275.00
+ Plus Shipping

Qty.
Availability: Low


VulcanUAV 250AMP Power Distribution Board

V-250A-PDB - VulcanUAV 250AMP Power Distribution Board


The VulcanUAV Double sided Power Distribution Board capable of handling 250A with 8 or more ESCs. One side connects all negatives and the other all positives. A total of 18 pairs of solder pads are provided that can be used as appropriate and convenient, but 12mm diameter pads are provided for heavy duty battery cables, eight 9mm for ESCs, and six 9mm and 7mm for other auxiliary power feeds. Due to the relatively thick copper used in this board, a powerful soldering iron is recommended. Mounting holes for this board are pre drilled in the Vulcan frame plates.
Diameter: 64mm
Mounting Hole Diameter: 3mm
Weight: 18grams.

V-250A-PDB

$36.00
+ Plus Shipping

Qty.
Availability: Yes


VulcanUAV 400AMP Power Distribution Board V2

V-400A-PDB - VulcanUAV 400AMP Power Distribution Board V2


VulcanUAV 400AMP Power Distribution Board V2
Power distribution board for large multicopters.

The new 400A V2 PDB from Vulcan uses the same well proven design used in the 250A but with a higher current rating.
It features no less than 18 pairs of solder pad connection points of different sizes to suit various uses from very heavy duty battery connections to small auxilliary power feeds.
- Diameter: 64mm
- Weight: 24g
- Mounting Holes: 3mm
- Solder pad diameter: 7 - 12mm
- Current Capacity: up to 400A
- 10mm Nylon Mounting Pillars and 6mm bolts included.
- Please Note: Due to the very high copper thickness on this board you will need a soldering iron with a large head of minimum 80W to make good solder joints, ideally more!

V-400A-PDB

$58.00
+ Plus Shipping

Qty.
Availability: Yes

© AddictiveRC LLC - All Rights Reserved | Website Development and Design by TYCOMM.NET