AddictiveRC - Everything Radio Controlled
  Return to AddictiveRC Home Page Custom Built Multirotor UAV's ARF - Almost Ready to Fly Multirotor UAV's RTF - Ready to Fly Multirotor UAV's   AddictiveRC - 520-429-6493 Contact Us Online
  Main Page | Members | Photos | Videos | Forum | Blogs | Chat | Events | Groups  

ImmersionRC UHF (433mhz) Whip Antenna

ANT433SSRA - ImmersionRC UHF (433mhz) Whip Antenna

New! ImmersionRC UHF (433mhz) Whip Antenna

This simple, lightweight, 433MHz antenna is included with our EzUHF receivers.
Right-angle SMA connector with a piano-wire whip, flexible enough to survive some serious abuse.

ANT433SSRA

$3.50
+ Plus Shipping

Qty.
Availability: YES


FLYSIGHT TRANSMITTER MOUNT ADAPTER FOR BLACK PEARL MONITORS

BP-FS0132 - FLYSIGHT TRANSMITTER MOUNT ADAPTER FOR BLACK PEARL MONITORS

New! FLYSIGHT TRANSMITTER MOUNT ADAPTER FOR BLACK PEARL MONITORS

Used to mounting FlySight Black Pearl Monitor to your DJI Phantom or other brand transmitter.

BP-FS0132

$17.99
+ Plus Shipping

Qty.
Availability: Yes


FLYSIGHT TX5807 5.8GHZ 32-CHANNEL 700 MW VIDEO TX WITH ANTENNA/CABLES



BP-TX5807032 - FLYSIGHT TX5807 5.8GHZ 32-CHANNEL 700 MW VIDEO TX WITH ANTENNA/CABLES

New! FLYSIGHT TX5807 5.8GHZ 32-CHANNEL 700 MW VIDEO TX WITH ANTENNA/CABLES

BP-TX5807032

$99.99
+ Plus Shipping

Qty.
Availability: Yes


PZ0420 Sony Super HAD CCD 600TVL FPV Cam

CC1333 - PZ0420 Sony Super HAD CCD 600TVL FPV Cam

New! Sony Super HAD CCD 600TVL IR Sensitive FPV Cam

This Sony PZ0420 FPV camera sports a 1/3 inch Super HAD CCD producing a high quality image.
It features a Nextchip 2040 SDP with a minimum illumination of up to 0.01Lux.

Specs:
- CCD 1/3 inch Sony Super HAD II CCD
- 2.8mm Lens
- Pixel: NTSC: 768(H) x 494(V)
- Resolution: 600TVL
- Shutter Speed(CCDIris): 1/60 to 1/00000Sec
- Noise: >60 (AGC Off)
- Auto Gain
- IR Wavelength: 850nm
- Day Night Shift
- Menu OSD removeable board
- Auto Iris
- Dimms 38mm x 38mm (Can be cut down)
- Power Consumption: 80ma

CC1333

$40.99
+ Plus Shipping

Qty.
Availability: Yes


Flysight 5.8ghz Cloverleaf Antenna for FPV RPSMA


CPA-5G-FPV - Flysight 5.8ghz Cloverleaf Antenna for FPV RPSMA

New! Flysight 5.8ghz Circular Polarized Antenna Set (2).
Connector: RPSMA (hole).

CPA-5G-FPV

$41.99
+ Plus Shipping

Qty.
Availability: Yes


Flysight 5.8ghz Cloverleaf Antenna for FPV SMA


CPA-5G-P-FPV - Flysight 5.8ghz Cloverleaf Antenna for FPV SMA

New! Flysight 5.8ghz Circular Polarized Antenna Set (2).
Connector: SMA (Pin).

CPA-5G-P-FPV

$41.99
+ Plus Shipping

Qty.
Availability: Yes


A250 FPV Mini X-Quad Frame


DAT-A250 - A250 FPV Mini X-Quad Frame

New! A250 FPV Mini X-Quad Frame

A250 (also known as FPV250) mini quadcopter frame, 250mm in diameter between the centers of diagonal motors.The quadcopter uses high strength plastic materials as JDI frames. The main frame is molded as a single whole piece, and attachable landing gears can be snapped in without using a screw to keep in position.

Weight: 110grams
Recommended Motors 1806 to 2206 Size.

DAT-A250

$11.00
+ Plus Shipping

Qty.
Availability: Yes


FPV250 V2 Mini Quadcopter Frame Kit

DAT-FPV250-V2 - FPV250 V2 Mini Quadcopter Frame Kit

New! FPV250 V2 Mini Quadcopter Frame Kit
This mini-sized quadcopter is innovated from FPV 250 and it also measures in at a mere 250mm. We add a symmetric glass fiber frame on and in the center bay which ensures the motors/ESCs work equally hard and the Flight Controller can apply consistent power to level the frame.
The area for flight controller and FPV equipment is large and completely covered by a Flight Controller cover. The FC cover also doubles as an optional battery tray. The Li-Po can be moved across a large area of the frame to optimize the CG. This enables flying with different equipment and number of cameras.

Features:
- Built from ultra durable polyamide nylon and high quality glass fiber.
- One-piece nylon construction for durability.
- The special dismountable glass fiber frame.
- Larger mounting spaces.
- Wide range of motor and power options.
Specs:
- Width:250mm
- Height:95mm
- Weight:160g(without electronics)
- Motor Mount Bolt Holes:16/19mm
Required:
- 4 x Motors 1506~2208
- 4 x 10~15 Amp ESC
-4 x 5030~5045 Prop (2CW & 2CCW)
- 1 x Multi-Rotor Control Board
- 1 x 800~1300mAh 7.4~11.1V (2s or 3s) Lipoly battery

DAT-FPV250-V2

$21.00
+ Plus Shipping

Qty.
Availability: Yes


Dragon Circuits Sparky Flight Controller Auto-Pilot

DC-Sparky-FC - Dragon Circuits Sparky Flight Controller Auto-Pilot

New! Dragon Circuits Sparky Flight Controller Auto-Pilot

Dragon Circuits would like to introduce the highly anticipated Sparky flight controller. We have taken this amazing flight controller designed by Peabody124 for Tau Labs and built it here in the USA using the same stringent inspection and manufacturing methods used for our aerospace and military customers. All the sensors in Sparky are genuine, no cloned sensors here. These two factors together equal the highest quality flight controller on the market today

Specs:

- GPS capable for functions such as RTH (Return To Home), Position Hold and Waypoint navigation in conjunction with a ground station.
- Mavlink compatible for the use of telemetry radios for use with a ground station to provide location information and waypoint navigation.
- 9 dof accelerometer / gyro for the absolute quickest and most accurate angle recognition and correction
- 2 serial ports
- PPM only – SBus Support and DSM2/x support with user selectable 3.3v or 5v setting.
- Camera stabilization output for 3 axis servo driven Gimbals.
- 10 channel outputs.
- Up to 3 adc inputs for rssi.
- Very compact design, perfect for small UAV’s where space is limited. Also excellent in larger machines as well.
- Weight: 6.9g with right angle header pins.
- 30mm x 30mm mounting pattern
- Available with 90 degree header pins and straight header pins for easy installation no matter what your frame requires.
- Taulabs ground station / firmware compatible.

Vehicle compatibility options include:

- Multirotor – Quad X, Quad +, Hex, Hex x, Hex Y6, Octo, Octo V, Octo Coax X, Octo Coax + Ground
- Car/Truck, Motorcycle, Tank Helicopter.
- CCPM, FP Fixed Wing.
- Standard (elevator, aileron, rudder), Elevon and VTail mixing Custom – mix your own settings for almost any vehicle.

For more info please visit: http://www.taulabs.org

Tau Labs Getting Started: Episode 1 - basic configuration for first flight from peabody124 on Vimeo.


Tau Labs Getting Started: Episode 2 - Advanced Calibration from peabody124 on Vimeo.


DC-Sparky-FC

$70.00
+ Plus Shipping

Qty.
Availability: Yes


ImmersionRC EZUHF 4 Channel UHF RX

EZUHF4 - ImmersionRC EZUHF 4 Channel UHF RX

New ImmersionRC EZUHF 4 Channel RX

Featherweight Long-Range R/C receiver Ideal companion to the EzUHF transmitter. Single-board design, weight only 8g. Sensitive receiver, range comparable to its 8 channel big-brother. Ideal for long-range flights, with lightweight foam models, without any safety risk.

Features:

- Reliable FHSS Link (Frequency Hopping, Spread Spectrum)
- 433MHz/70cm Ham band operation
- -113dBm Sensitivity
- Ceramic filtered input, eliminates nearby high-power video Tx interference
- Mikrokopter mode, emits PPM (8 channels!) on a chosen channel
- USB Connection for easy firmware upgrades, and advanced configuration
- Standard SMA antenna connector, compatibility with standard 433/70cm band antennas
- 4 standard servo connectors
- Failsafe, preset by button on the EzUHF transmitter
- Power Requirements: 4.8v - 6v, 33mA.

EZUHF4

$70.00
+ Plus Shipping

Qty.
Availability: YES


ImmersionRC EZUHF JR Fr-Sky TX Module

EZUHF_JR - ImmersionRC EZUHF JR Fr-Sky TX Module

New! ImmersionRC EZUHF JR Fr-Sky TX Module

A long-awaited module, compatible with most radios which use the 'JR' module standard, including the 9XR, and the new Taranis. Same features as its big brother, but without the cabling, nor external batteries

- 500mW of EzUHF Power
- JR Module, compatible with the Hobby King 9xR, and the FrSky Taranis
- Headtracker port, capable of powering a headset
- High-low power switch
- 100% compatible with all EzUHF Receivers.

EZUHF_JR

$100.00
+ Plus Shipping

Qty.
Availability: YES


Flysight Carbon Fiber Monitor Bracket



FB01-FPV - Flysight Carbon Fiber Monitor Bracket

New! Flysight Carbon Fiber Monitor Bracket

Features:
- Fits Transmitters with 5mm Handle
- Folding Design
- Fits 7 to 10inch LCD Displays

FB01-FPV

$21.99
+ Plus Shipping

Qty.
Availability: 0


New! 5.8ghz 1200mW TX/RX for Long Range-Suite



FPV-58-S-1200 - New! 5.8ghz 1200mW TX/RX for Long Range-Suite

New! New! 5.8ghz 1200mW TX/RX for Long Range-SuiteThis is a FPV RC Mini 5.8GHz 1200mW wireless AV transmitter and receiver combo set.
9 channel high power transmitter/Receiver for long distance transmission.
TX with integrated Heat Sink & Fan Cooling.
Fully compatible with 2.4GHz R/C radios!

Specs:

Transmitter:

- Transmitter 1200mW 5.8ghz
- Dimensions: 45.5 x 28.5 x 18mm
- Weight: 35grams
- Channel Switching during flight
- Working voltage: 12v
- Working current: 400ma
- heat sink and Fan for Cooling
- Working Channels:
- 5720mhz 5740mhz 5760mhz 5780mhz 5800mhz 5820mhz 5840mhz 5860mhz 5880mhz

Receiver:

- Dimensions: 72 x 43 x 11mm
- Working Voltage: 12v
- Working Current: 200ma
- Working Frequency: 5.8ghz
- Digital Display
Working Frequencies: Same as Transmitter above

Includes:
- 1 x Transmitter
- 1 x Receiver
- 2 x Mushroom Antennas 3dbi(upgrade from Dipole)
- 2 x cables
- 2 x T-Plug yo DC Converter Cable
- 2 x AV Cable 1 x 5.8ghz sma converter connector

Compatible with goggles: Fatshark Aviator 5.8Ghz, Dominator in 5.8Ghz and Predator.

FPV-58-S-1200

$184.99
+ Plus Shipping

Qty.
Availability: Yes


New! 5.8ghz 600mW TX/RX for Long Range-Suite



FPV-58-S-600 - New! 5.8ghz 600mW TX/RX for Long Range-Suite

New! 5.8ghz 600mW TX/RX for Long Range-Suite

This is a FPV RC Mini 5.8GHz 600mW wireless AV transmitter and receiver combo set
Compatible with Older 8-pass Receiver

Specs: TX TS832
- Transmitting frequency: 5.8G
- Transmit Power: 600mw
- Frequency point: 32 points
- Input Voltage :7-16V
- Antenna gain: 2db
- Video system: NTSC
- Video bandwidth: 8M
- Audio bandwidth: 6.5M
- Weight: 22g
- Dimensions: 54x32x10mm


RX RC832

- Working frequency: 5.8GHz
- Frequency point: 32 points
- Working current: 200mA max.
- Antenna Impedance: 50?
- Antenna connector: receiving and transmitting module end RP-SMA jack antenna RP-SMA plus
- Antenna gain: 2db
- Video Impedance: 75?
- Video system: NTSC
- Video output: 2
- Dimensions: 80x65x15mm
- Receiver Weight: 85g.

Features:

-32 channels: Cover A, B, E bands and F band (Airwave band), 4 bands.
- Two switching buttons: CH button for frequencies channels switching, FR button for frequency band switching
- Two digital display: one for CH and the other for FR, real-time positioning which frequency band and which channel received
- Power off memory: Replay the very last frequency band and channel
- Independent video and audio signal outputs.

FPV-58-S-600

$164.99
+ Plus Shipping

Qty.
Availability: Yes


New! Duo Diversity 5.8GHz Receiver D58-2

FPV-D58-2 - New! Duo Diversity 5.8GHz Receiver D58-2

New! Duo Diversity 5.8GHz Receiver D58-2

Product Note: Do NOT power up receiver unit without antenna(s) - by doing so, you will damage the receiver, and this will void warranty in full

DS58-2 Features:

- Dual receiver system with auto switching for best signal clarity
- Triple, buffered AV outputs
- Can receive (2) different channels at the same time
- Not affect by 2.4GHz R/C transmitters
- AV Receiver with Diversity inputs
- Small, light weight and durable, with anodized aluminum housing

- D58-2 Diversity Dual Receiver Frequencies:

5.8GHz: 5865 / 5845 / 5825 / 5805 / 5785 / 5765 / 5745 / 5725 (MHz - BAND A) NOT Compatible with FatShark Transmitters.

Specifications:

- Video Output: 75?/1Vp¬p
- TV Scanning System: PAL/NTSC/SECAM
- Input Voltage: 12V/500mA
- Weight: 197g
- Dimensions: 76mm x 64mm x 18mm

FPV-D58-2

$120.00
+ Plus Shipping

Qty.
Availability: Yes


New! 5.8G Wireless AV Receiver For FPV (RC805)

FPV-RC805-RX - New! 5.8G Wireless AV Receiver For FPV (RC805)

New! 5.8G Wireless AV Receiver For FPV (RC805)

Features:

- Receiving frequecny:5725-5865MHz
- Receiving sensitivity:-90dBm
- Double lines AV output:analog AV signal output
- Antenna connector:SMA(Inside the needle)
- Power supply voltage: 6.5-15V
- Supply current: 150mA
- Dimension:75 x 54 x 15mm
- Voltage input: 12v +-5%
- Power consumption: 100mA
- Channels 8
- AV signal impedance: 75?
- Antenna Contact: SMA

FPV-RC805-RX

$39.99
+ Plus Shipping

Qty.
Availability: Yes


New! 5.8G 500MW Video Transmitter (TS352)



FPV-TS352 - New! 5.8G 500MW Video Transmitter (TS352)

New! 5.8G 500MW Video Transmitter (TS352) 8-Channle

Specs:

- 5.8G 500MW power wireless AV transmitter and sender
- 5km transmitting distance on open area
- Transmitting frequency: 5725-5865MHz 8channels
- Transmitting power: 27dBm/500mW
- Frequency control:built-in frequency and phase lock loop
- Power supply voltage:6.5-15V
- Supply current:600mA
- Dimension: 68 x 26 x 28mm

FPV-TS352

$90.00
+ Plus Shipping

Qty.
Availability: Yes


New! 5.8G 1000mw 8CH Video Transmitter


FPV-TX51W - New! 5.8G 1000mw 8CH Video Transmitter

New! 5.8G 1000mw 8CH Video Transmitter

Specs:

- DC in range: 12V/5000mA(7.0~15V)
- Size: 59x27x33 mm

Features:

- This transmitter is just light, compact and powerful, a very good choice for 5.8G middle range FPV
- Can be used together with 2.4GHz Spektrum, Futaba, JR and other R/C radios!
- Onboard quiet switching regulator, supply 12V camera

FPV-TX51W

$115.00
+ Plus Shipping

Qty.
Availability: Yes


New! 5.8G 600MW 8CH Video Transmitter Golden Edition TX5600




FPV-TX5600 - New! 5.8G 600MW 8CH Video Transmitter Golden Edition TX5600

New! 5.8G 600MW Video Transmitter Golden Edition TX5600 8 Channels

Features:

- 600mW Output
- 5.8ghz Transmission
- 8 Channels
- Includes full cable set.

FPV-TX5600

$89.99
+ Plus Shipping

Qty.
Availability: Yes


New! Sony WDR770 Very High Resolution Color FPV CAM


FPV-WDR-770 - New! Sony WDR770 Very High Resolution Color FPV CAM

New! Sony WDR-770 Color Mini-FPV Camera

The WDR770 camera comes with a hand full of awesome features, making your videos better than ever by giving you the access to fine tune and optimize your videos.

With the latest Sony EXview Super HAD ll CCD image sensor, it will provide astonishing and ultra sharp pictures.
You will find very important features for FPV like the BLC (Backlight Compensation), WDR (Wide Dynamic Range), DNR (Digital Noise Reduction) OSD (On Screen Display) for call sign or user name, 32x pre-selected D-zoom and much more!

Features:

- High-Resolution of 700 TVL
- 1/3" Sony Super EXview HAD CCD
- WDR (Wide Dynamic Range)
- DNR / ATR (Adaptive Tone-curve Reproduction / Digital WDR)
- Digital Day and Night
- Privacy Screen Mask
- OSD with Built-In Joystick Controller
- Extreme Clear Picture
- Size 30mm(W) X 30mm(H)

Specs:

- Resolution 700 TVL
- Power: 12 V DC
- Comsumption 125mA
- Camera Weight Approx. 29g (1 oz)
- Scanning System 2:1 Interlace
- Effective Pixels NTSC : 976(H) x 494(V)
- S/N Ratio More than 50dB (AGC Off)
- Min. Illumination 0.1 Lux
- Lens Fixed 3.6mm Board Lens
- Electronic Shutter NTSC : 1/60 ~ 1/100,000 sec
- OSD Built-In
- Video Output 1.0 Vp-p Composite (75)

FPV-WDR-770

$166.25
+ Plus Shipping

Qty.
Availability: Yes


FEELWORLD 10.1inch FPV Monitor with Dual 5.8ghz Receiver

FPV1032-A - FEELWORLD 10.1inch FPV Monitor with Dual 5.8ghz Receiver

New! FEELWORLD 10.1inch FPV Monitor with Dual 5.8ghz Receiver

Features:
- No Blue Screen
- High Video Quality (1024 x 600 pixels)
- Built-in Speakers
- Receiving sensitivity: -90dBm
- Frequency Control: Phase Lock Loop
- Aspect Ratio: 16:9
- Brightness: 500cd/m2
- Contrast: 500:1
- Input Signal: HDMI, Video, Audio, RF
- Built in 32 channel 5.8ghz Dual RX.

FPV1032-A

$242.75
+ Plus Shipping

Qty.
Availability: Yes


FRSKY TARANIS X9D PLUS 2.4GHZ OPEN SOURCE TRANSMITTER


FRSKY-X9DPLUS - FRSKY TARANIS X9D PLUS 2.4GHZ OPEN SOURCE TRANSMITTER

New! FRSKY TARANIS X9D PLUS 2.4GHZ OPEN SOURCE TRANSMITTER

The new FrSKY Taranis Plus+ improving on the classic and reliable FrSKY Taranis.
What's New:
- Haptic Feedback
- Blue Backlight
- Better Potentiometers and feedback on the sliders and knobs
- Improved internal wiring.

Includes:
- Taranis X9D Plus+ MODE2
- NiMH Taranis Battery
- Neck strap
- US 2-pin wall charger
- US toEU 2-Pin Adaptor.

FRSKY-X9DPLUS

$199.99
+ Plus Shipping

Qty.
Availability: Yes


FATSHARK DOMINATOR HD V2 FPV HEADSET W/DVR



FS-1074 - FATSHARK DOMINATOR HD V2 FPV HEADSET W/DVR

New! FATSHARK DOMINATOR HD V2 FPV HEADSET W/DVR

Overview:
Dominator HD2 is 3D modular wireless FPV headset that displays both analog (PAL/NTSC) and digital (HDMI) sources in 2D and 3D (side/side format). Integrated DVR records analog video for lost model recovery and fan faceplate ensures maximum comfort and defogging. LED indicator battery instantly shows remaining battery life.

FS-1074

$520.99
+ Plus Shipping

Qty.
Availability: Yes


FX MARVEL VISION AUTO SEARCH RACE BAND FPV GOGGLES



FX90001 - FX MARVEL VISION AUTO SEARCH RACE BAND FPV GOGGLES

New! FX MARVEL VISION AUTO SEARCH RACE BAND FPV GOGGLES

Nice Lightweight FPV goggles with Detachable 4.4 inch LCD Monitor.

FX90001

$119.98
+ Plus Shipping

Qty.
Availability: Yes


FrSky XSR 2.4GHz 16CH ACCST Receiver w/ S-Bus & CPPM



FrSKY-XSR - FrSky XSR 2.4GHz 16CH ACCST Receiver w/ S-Bus & CPPM

New! FrSky XSR 2.4GHz 16CH ACCST Receiver w/ S-Bus & CPPM

FrSky's XSR 2.4GHz receiver features 16ch ACCST, with S-Bus and CPPM. This little guy is physically smaller and lighter weight than the X4R receiver. Making it great for mini race quads!
FrSky X-series Module & X9D & X9DP &X9E & X12S in D16 mode. XSR does not work with D-series Module The LBT version of XSR receiver only works with FrSky D16-LBT Mode.


FrSKY-XSR

$29.99
+ Plus Shipping

Qty.
Availability: Yes


GAUI GV-100 5.8GHz Tx/Rx System

G-921100 - GAUI GV-100 5.8GHz Tx/Rx System
New! GAUI GV-100 5.8GHz Tx/Rx System

Available December 2012.

G-921100

$369.00
+ Plus Shipping

Qty.
Availability: Yes


Holybro Race32 Racing Flight Controller F303 (Naze32 F3 w/Baro)


HB-11015 - Holybro Race32 Racing Flight Controller F303 (Naze32 F3 w/Baro)

New! Holybro Race32 Racing Flight Controller F303 (Naze32 F3 w/Baro)

Features:
- 36x36mm board with 30.5mm mounting holes
- Weight: 5 grams
- STM32F303 CPU with FPU 256kB flash
- 8MB (64Mbit) High-Capacity Flash
- MPU6050 accelerometer/gyro
- MS5611 barometer (Deluxe only)
- HMC5983 magnetometer (Compass Sensor, Deluxe only)
- Micro USB socket
- 2x 6pin JST-SH sockets (PWR,GPS/I2C)
- 3x 4pin JST-SH sockets (OSD/TELEMTRY,UART3/ SERIAL RX,LED,RSSI)
- 1x 8pin JST-SH sockets (PPM,PWM,5V,GND)
- 1x 10pin JST-SH sockets (ESC/Servo connections, 5V, GND)
- 4x 3pin though-holes for pin headers for ESC/Servo connections
- 1x 2pin though-holes for pin headers for buzzer
- 1x 3pin JST-ZH sockets (sat.DSM).

HB-11015

$39.99
+ Plus Shipping

Qty.
Availability: Yes


Holybro Rice32 Micro Racing Flight Controller (Naze32 F3 with baro)


HB-11016 - Holybro Rice32 Micro Racing Flight Controller (Naze32 F3 with baro)

New! Holybro Rice32 Micro Racing Flight Controller (Naze32 F3 with baro)

Features:
- 30x18mm board
- 5 grams
- STM32F303 CPU with FPU 256kB flash
- 8MB (64Mbit) High-Capacity Flash
- MPU6050 accelerometer/gyro
- MS5611 barometer (Deluxe only)
- HMC5983 magnetometer (Compass Sensor, Deluxe only)
- Micro USB socket
- 2x 6pin JST-SH sockets (PWR,GPS/I2C)
- 3x 4pin JST-SH sockets (OSD/TELEMTRY,UART3/ SERIAL RX,LED,RSSI)
- 1x 8pin JST-SH sockets (PPM,PWM,5V,GND)
- 1x 10pin JST-SH sockets (ESC/Servo connections, 5V, GND)
- 4x 3pin though-holes for pin headers for ESC/Servo connections
- 1x 2pin though-holes for pin headers for buzzer
- 1x 3pin JST-ZH sockets (sat.DSM).

HB-11016

$39.99
+ Plus Shipping

Qty.
Availability: Yes


HYPERION MINI 600TVL CAMERA WITH BUILT-IN 5.8GHZ 25MW VTX


HP-58MCAM25 - HYPERION MINI 600TVL CAMERA WITH BUILT-IN 5.8GHZ 25MW VTX

New! The Hyperion Mini Cam + 600tvl VTX combines an FPV camera and a 25mW 5.8GHz transmitter into a single unit no bigger than a thimble. Its signal range is ideal for small park flyers or racing quads and it can be powered separately or through the model's receiver, or an auxiliary 2.5-5V power source.

HP-58MCAM25

$54.95
+ Plus Shipping

Qty.
Availability: Yes


HYPERION 5.8GHZ TS832 TX/RC832 RX COMBO SET


HP-FPTS832C - HYPERION 5.8GHZ TS832 TX/RC832 RX COMBO SET

New! HYPERION 5.8GHZ TS832 TX/RC832 RX COMBO SET

Introducing the best of both World's. We take the guessing out of FPV and provide you with a ready-to-go Transmitter and Receiver Combo Set (TS832 + RC832).The TS832 Transmitter packs a whopping 600mW of ultra clean 5.8GHz power! A must for those looking for longer range and locked-in video. The TS832 is transmitting a full range of 32 channels and uses an easy to use 2 button interface, it also comes with antenna and a clean pre-wired harness, and only weighs in at a mere 21grams, it’s Perfect for a wide range of Aircraft, Quadcopters and your other projects!

The RC832 Receiver is nice and compact in size for easy integration into your ground station, but big in quality and features. The receiver uses the same two button interface as the TS832 Transmitter making channel swapping a breeze. There are two independent channel AV outputs for both audio and video. So you can use a monitor and set of goggles or maybe a DVR to record your flight, for when your significant other asks where you were for the last 4 hours. Powering the receiver at the field is as easy as plugging in a 3 cell Li-Po Battery into the included pre-wired cable with mini JST. It just doesn’t get any better or simpler than this!

*Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty.

HP-FPTS832C

$92.95
+ Plus Shipping

Qty.
Availability: Yes


LILLIPUT 664/W 7 INCH LCD FPV MONITOR W/5.8 GHZ 7 CHANNEL RX - FOR FAT SHARK



HP-FPVMON7 - LILLIPUT 664/W 7 INCH LCD FPV MONITOR W/5.8 GHZ 7 CHANNEL RX - FOR FAT SHARK

New! LILLIPUT 664/W 7 INCH LCD FPV MONITOR W/5.8 GHZ 7 CHANNEL RX - FOR FAT SHARK

Specs:
- 7inch FPV Monitor
- IPS panel 178° wide viewing angles
- High resolution: 1280×800
High brightness: 400cd/?
- High contrast: 800:1
- Faster response time
- Wide voltage: DC 7-24V
- 5.8GHz wireless receiver
- Slim & portable design

Features:
- Multiple power support, makes outdoor photography more convenient and practical
- No "blue screen" problem when the signal gets weak, from 100 to 2000 meters wireless distance
- Sunlight readable with ultra brightness & definition screen

5.8GHz Wireless AV Receiver
- Built-in AV receiver support PAL / NTSC switch automatically, anti-black, anti-blue, anti-flash
- Simulation of composite video AV inputs, aerial camera connection
- 5.8Ghz frequency channel
- Optional high capacity rechargeable Li-ion battery, make power cables free
- Small, light weight, durable

Included in the box:
- Shoe Mount
- Battery Plate
- Battery plate bracket
- Flexible folding sun shade
- 5.8GHz wireless AV receiver (installed)
- Composite cable
- 12V DC adapter
- Manual

HP-FPVMON7

$350.00
+ Plus Shipping

Qty.
Availability: 1


LILLIPUT 664/W 7 INCH LCD FPV MONITOR W/5.8 GHZ 8 CHANNEL RX - FOR DJI 5.8 & MORE



HP-FPVMON8 - LILLIPUT 664/W 7 INCH LCD FPV MONITOR W/5.8 GHZ 8 CHANNEL RX - FOR DJI 5.8 & MORE

New! LILLIPUT 664/W 7 INCH LCD FPV MONITOR W/5.8 GHZ 8 CHANNEL RX - FOR DJI 5.8 & MORE

Specs:
- 7inch FPV Monitor
- IPS panel 178° wide viewing angles
- High resolution: 1280×800
High brightness: 400cd/?
- High contrast: 800:1
- Faster response time
- Wide voltage: DC 7-24V
- 5.8GHz wireless receiver
- Slim & portable design

Features:
- Multiple power support, makes outdoor photography more convenient and practical
- No "blue screen" problem when the signal gets weak, from 100 to 2000 meters wireless distance
- Sunlight readable with ultra brightness & definition screen

5.8GHz Wireless AV Receiver
- Built-in AV receiver support PAL / NTSC switch automatically, anti-black, anti-blue, anti-flash
- Simulation of composite video AV inputs, aerial camera connection
- 5.8Ghz frequency channel
- Optional high capacity rechargeable Li-ion battery, make power cables free
- Small, light weight, durable

Included in the box:
- Shoe Mount
- Battery Plate
- Battery plate bracket
- Flexible folding sun shade
- 5.8GHz wireless AV receiver (installed)
- Composite cable
- 12V DC adapter
- Manual

HP-FPVMON8

$350.00
+ Plus Shipping

Qty.
Availability: 1


Headplay HD Headset FPV Goggles with 1300mah HV Lipo Battery White





HP-HDPLY58W - Headplay HD Headset FPV Goggles with 1300mah HV Lipo Battery White

New! Headplay HD Headset FPV Goggles with 1300mah HV Lipo Battery

- White

HP-HDPLY58W

$280.00
+ Plus Shipping

Qty.
Availability: Yes


Sony 1.3Mega CMOS Sensor FPV Camera

HS1160F - Sony 1.3Mega CMOS Sensor FPV Camera

New! Sony 1.3Mega CMOS Sensor FPV Cam with 3.6mm Lens

This high resolution 1.3 Megapixel FPV Camera comes with a 3.6mm Lens
Has ultra low illumination that reaches 0.001Lux.
It supports wide voltage from 5 to 24 volts power. Perfect for FPV Machines.

Specs:
- Image Sensor: Sony 1/3 inch Exmor CMOS
- Resolution: 800TVL
- Total Pixels: 1312(H) x 1069(V) 1.4M Pixel
- Effective Pixels: 1280(H) x 1024(V)
- Minimum Illumination: Color: 0.02Lux B&W: 0.001Lux
- Electronic Shutter: NTSC: 1/60 to 1/100,000Sec
- Power: 5V to 24V
- Dimms: 36mm x 36mm (cant be cut down to 32mm x 32mm)
- Includes removable OSD Programming Board.

HS1160F

$47.50
+ Plus Shipping

Qty.
Availability: Yes


Foxeer XAT600M DC 5V-22V 600tvl Sony Super HAD CCD FPV Camera (IR Sensitive)


HS1177 - Foxeer XAT600M DC 5V-22V 600tvl Sony Super HAD CCD FPV Camera (IR Sensitive)

New! Foxeer XAT600M DC 5V-22V 600tvl Sony Super HAD CCD FPV Camera (IR Sensitive)

This is an wonderful for FPV use it adopts 1/3 inch Sony Super HAD II CCD with Nextchip 2040 DSP which provides 600TVL high resolution.
Besides DWDR 2D DNR 0.01 lux minimum illumination as well as powerful OSD make it excellent for FPV.
It features 5~22V wide range input voltage which allows you change battery without worries.
Friendly with Most OSD's and transmitters.
Sized at 26x26mm makes sure it can fit most of the drones on the market with 3 holes brackst is more cponvenient to install.

HS1177

$41.99
+ Plus Shipping

Qty.
Availability: Yes


HITEC X4 MICRO AC/DC 1-CELL LIPO CHARGER (44212)

HTC-44212 - HITEC X4 MICRO AC/DC 1-CELL LIPO CHARGER (44212)

New! HITEC X4 MICRO AC/DC 1-CELL LIPO CHARGER (44212)

Looking for a dependable portable charger for all your micro flyers?
Look no further. Hitec has done it again with our latest, the X4 Micro Charger.
This affordable charger features a built-in AC/DC power supply and four independent charge ports and each with the four most common battery connectors to cover all your needs.
The individual LED displays show current, capacity and charge status, keeping you informed.
This recent addition to our impressive charger line fits the bill without taking too many from your wallet.
Backed by Hitec the X4 Micro may be compact, but it is big on performance.

Features:

- AC/DC Dual Power Input
- Four Independent Charge Ports
- Each Port Features Four Popular Battery Connectors and an Independent LED Display
- Audible Alarm Indicating Process Termination
- Adjustable Charge Current: 0.1 to 1 amp
- Comprehensive Safety Features Including Short Circuit, Over Current, Battery Reverse Polarity and DC Input Voltage Protection.

Specs:

- AC Input: 100-240 volts
- DC Input: 11-15 volts
- Charge Circuit Power: 4 x 4W
- Charge Current Range: 0.1 to 1.0 amp
- Net weight: 10 ounces
- Dimensions: 5.2 x 3.9 x 2.0 inches.

HTC-44212

$49.99
+ Plus Shipping

Qty.
Availability: Yes


ImmersionRC Duo5800 v3 Diversity A/V Rx

IRC-DUO5800V3 - ImmersionRC Duo5800 v3 Diversity A/V Rx

New! ImmersionRC Duo5800 v3 Diversity A/V Rx

New V3 version with increased sensitivity and better video quality!
The ImmersionRC Duo5800 finally makes 5.8GHz A/V links affordable. Compatible with the ImmersionRC 25mW, and 600mW 5.8GHz transmitters, the FatShark 100mW transmitter, and the Iftron 5.8GHz transmitters, the Duo5800 provides a high quality video link, which co-exists with adjacent 2.4GHz R/C transmitters.

Another ImmersionRC first, the TrackerLink port makes a direct connection between the Duo5800 and the ImmersionRC Antenna Tracker (Rev. 2). This link provides the tracker with the RSSI signal strength data from each antenna, which the tracker then displays on its LCD display. This data is then used to optimize the tracking antenna’s positioning, continuously during a flight.

The higher video bandwidth, when compared with 2.4GHz systems, provides a high quality video image.

The standard 3.5mm 4-pole jacks combine video and stereo audio in one simple connection. These are compatible with all FatShark/ImmersionRC equipment, and greatly reduce ground-station ‘clutter’. (Combine with the ImmersionRC Power Box to increase the number of A/V outputs to 5)
Cables terminated in the 4-pole jacks are available in various lengths to interconnect equipment.
Two buffered A/V outputs are supplied, in addition to the TrackerLink port, allow an LCD Display/Goggles to be used at the same time as a video recorder.
An audible low-battery alarm provides plenty of warning before a ground-station battery is drained. Programmable for auto-detection of LiPo packs, or a user-defined voltage level.

Specs:
- A/V receiver with diversity antenna inputs
- TrackerLink for direct link to the ImmersionRC Antenna Tracker (Rev. 2)
- Sensitive receivers (-90dBm)
- SMA antenna connectors, compatible with standard 5.8GHz antennas (omni or directional)
- Frequencies: 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz
- Two standard whip antennas included!
- Not affected by 2.4GHz R/C radios!
- Audible Low-battery alarm
- Weight: 200 grams
- Size: 80 x 100 x 23mm
- Input voltage range: 6 – 12V at 500 mA (3s Lipo Ideal)

Includes:
- Duo5800 Receiver
- 2 standard 5.8G whip antennas
- 1 power cable with bare wire leads and 2.1mm barrel connector
- 2 x 30cm a/v cables with female RCA connectors.

IRC-DUO5800V3

$239.00
+ Plus Shipping

Qty.
Availability: Yes


ImmersionRC EzOSD Deans

IRC-EZOSDD - ImmersionRC EzOSD Deans

New! ImmersionRC EzOSD with Deans Connectors

This version includes Deans style connectors on the current sensor
The FPVers OSD FPV is coming of age, and its time for FPV equipment to come of age also. The EzOSD was created by FPVers with hundreds of hours of experience, after listening to the wishes of countless ‘Newbies’, and experience pilots alike.

Simple Setup, Nobody wants to spent hours in front of a PC, or wading through a manual, to setup an OSD. The EzOSD’s on-screen menu system is integrated, and accessed using three simple buttons.

Its easy to exceed the maximum altitude, or distance, allowed for FPV (or any other flight) in your region. The EzOSD can be setup to warn you, when selected parameters are exceeded, for example, altitude > 150m. Support is also provided to comply with Amateur radio callsign broadcast requirements. The EzOSD can automatically broadcast your callsign periodically

Features:
- Crisp text, shadowed to ensure visibility against a summer sky, or a winter evening
- Robust design, reverse polarity protection, overvoltage protection
- Firmware upgrades without a PIC programmer, standard USB port on/board
- Simple, uncluttered display, just the essentials. Which way is home, and how long can I stay up here
- Warnings for low battery voltage, pack capacity reached, too high, too far, etc
- Periodic Amateur radio callsign broadcast, to comply with FCC regulations
- OSD control from a spare servo channel (optional)
- Intuitive menu system, with onboard menu buttons
- After-flight debriefing, shows a summary of the flight: Max. altitude, max. distance, max Speed, Average Speed, Distance Flown.

IRC-EZOSDD

$180.00
+ Plus Shipping

Qty.
Availability: Yes


ImmersionRC EZUHF 8 Channel Diversity Receiver

IRC-EZUHF8DIV - ImmersionRC EZUHF 8 Channel Diversity Receiver

New! ImmersionRC EzUHF 8 Channel Diversity Receiver
This is the perfect companion to the EzUHF Transmitter. Featuring a super sensitive receiver module with twin antenna inputs in diversity configuration.

- Reliable FHSS Link (Frequency Hopping, Spread Spectrum)
- -112dbm Sensitivity
- SAW Filtered input that eliminates nearby High-Power video tx interference
- Mikrokopter Mode, emits PPM on a chosen channel
- Diversity Antenna Configuration!

IRC-EZUHF8DIV

$124.00
+ Plus Shipping

Qty.
Availability: Yes


ImmersionRC EZUHF Radio Transmitter

IRC-EZUHFTX1 - ImmersionRC EZUHF Radio Transmitter

New! ImmersionRC EzUHF Long-Range RC Transmitter
Reliable long-range FPV/UAV model control. The most popular UHF Long Range control system in the FPV market. Proven solid RC link for up to 30Km+ using less than 500mW of RF power!

Features:
- Reliable FHSS Link (Frequency Hopping, Spread Spectrum)
- GFSK modulation ensures spectral purity
- 500mW (27dBm) output power
- Single pushbutton learning of failsafe positions
- Mates with 8 channel, and 4 channel EzUHF receivers

IRC-EZUHFTX1

$209.00
+ Plus Shipping

Qty.
Availability: Yes


ImmersionRC Uno 5.8Ghz A/V Receiver V4


IRC-UNO5800V4 - ImmersionRC Uno 5.8Ghz A/V Receiver V4

New! ImmersionRC Uno 5.8Ghz A/V Receiver V4

Ground Station Component Receiver:

The Uno5800 is the first in a line of ‘smart’ receivers designed for single-cable, plug and play, integration with the ImmersionRC Ground Station system.
The UNO5800 passes power, audio, video, and a bidirectional data link, through a single Mini-Din connector, to the Ground Station, and also provides traditional 3.5mm jacks, and DC power jacks, for compatibility with older systems. (mini-din connector will be available separately, Uno includes 1 30cm a/v cable with female RCA plugs and 1 2.1mm barrel connector power lead with bare wires)
The data link allows the Ground Station to know, at all times, the received signal strength (RSSI), allowing it to warn the pilot of low-signal conditions, helping ‘hone’ a GPS-tracked antenna mount, to ensure that the antenna is always optimally positioned pointing at the plane. This same data link allows the Ground Station to control various aspects of the receiver. An antenna mounted directly on the antenna’s RF output eliminates cable loses but, can cause difficulty gaining access to the controls directly on the receiver, but with the UNO’s data link channel selection can be controlled on the ground station.

With > -90dB sensitivity per receiver the Uno 5800 is sensitive, very sensitive. Paired with an appropriate antenna, it will give you many miles/km of range. Add an antenna tracker, and a higher gain antenna, and this range increases significantly.
Like every ImmersionRC product, we have engineered the UNO5800 from an FPV-er’s perspective. It will warn you when the receiver battery runs low, with an automatic, or user-settable low voltage threshold.

Nextwave:

FatShark and ImmersionRC Ltd. are proud to announce the launch of the 'NexWaveRF' series of A/V RF modules.
The first in this series are for the 5.8GHz band, using the 'Airwave' frequencies used previously by FatShark, ImmersionRC, and other companies such as Iftron.
The increased performance of these modules, combined with the 5.8GHz SpiroNET omnis, and the upcoming 5.8GHz SpiroNET patch antennas, will make FPV using CE-legal 25mW systems much more viable.
Frequencies (Airwave) : 5740MHz, 5760MHz, 5780MHz, 5800MHz, 5820MHz, 5840MHz, 5860MHz?(all within the legal ISM band).

- Dual buffered A/V outputs
- Single Cable Groundstation Connection (Power, Audio, Video, Control)
- 6-13v DC Supply
- High Bandwidth Stereo Audio.

IRC-UNO5800V4

$62.00
+ Plus Shipping

Qty.
Availability: Yes


ImmersionRC 600mw 5.8Ghz A/V Transmitter

IRC5.8-600MW - ImmersionRC 600mw 5.8Ghz A/V Transmitter

New! ImmersionRC 600mw 5.8Ghz A/V Transmitter
The 600mW version of the 5.8GHz transmitter greatly increases the range of a 5.8GHz link, adding a margin of security over the 25/100mW version. Team up with a Duo5800 receiver on the ground, and enjoy noise-free video further than you can see your model.
Compatible with 2.4ghz flight systems, FPV flight was hampered in its early years by the rapid spread of 2.4GHz R/C gear. This equipment caused interference on 2.4GHz A/V links which made them unusable.
The higher video bandwidth, when compared with 2.4GHz systems, provides a high quality video image.
The onboard switching regulator easily powers connected 5v cameras with a clean, noise-free power source, with enough power to drive power-hungry HD cameras.
The standard, polarized, locking FatShark/ImmersionRC connectors ensure that critical connections cannot work free during flight, and can never be inserted backwards.

Specs:

- 600mW (+28dBm) typical output power
- 6-25V input voltage, 2S-6S LiPo compatible
- Typical power consumption of just 3W at any input voltage
- Super-quiet, high efficiency switching regulator
- Small, light weight, all-in-one A/V transmitter solutionbr
- Robust and durable locking connectors
- 5V power output, ideal for powering cameras
- No interference with sensitive RC equipment by design
- High bandwidth video
- High bandwidth stereo-audio
- Composite video input at 1Vpp/75 ohm
- Two sets of A/V connectors, for easy patch-in of an audio source
- 7 channels (5740, 5760, 5780, 5800, 5820, 5840, 5860), PLL synthesized
- FM Audio/Video Modulation
- 50 ohm antenna impedance
- Weight: 18-grams
- Size 50 x 23 x 15 mm.
- Requires airflow for cooling, do not mount in an enclosed area
- Must be used with an antenna at all times
- May require a license to operate!!

IRC5.8-600MW

$69.00
+ Plus Shipping

Qty.
Availability: Yes


600TVL 1/4 FPV 170 DEGREE WIDE ANGLE LENS MICRO-BOARD CAMERA

MICROBOARDCAM - 600TVL 1/4 FPV 170 DEGREE WIDE ANGLE LENS MICRO-BOARD CAMERA

New! 600TVL 1/4 FPV 170 DEGREE WIDE ANGLE LENS MICRO-BOARD CAMERA

Description:
- Resolution: 1280 x 960
- Resolution 600TVL
- Camera Dimensions: 12.5mm x 12.5mm x 17mm
- Lux rating: 0.5LUX
- Format: NTSC
- Power supply range: 3.7v to 5v 100ma
- Wide-angle 1.8mm (170 degree)
- Image sensor:1/4 CMOS image sensor
- Sensitive area: 3.5964mm x 2.7084mm
- 648 pixels (horizontal) × 488 (vertical) 648 (horizontal) × 488 (vertical)
- Scanning Frequency Horizontal: 15.625KHz
- Vertical: 50Hz
- level: 15.7343KHz
- Vertical: 60Hz
- Electronic Shutter 1/60- 1-8000 (sec)
- SNR ?48dB (AGC OFF)
- Minimum illumination : 0.1 Lux / F1.2
- Composite video signal :1.0Vp-p 75?
- Standard Lens :1.8 mm
- Power: DC5V ± 10% 70mA ± 10%
- Operating temperature :-10 ~ 60 degree centigrade RH95% Max.

MICROBOARDCAM

$19.99
+ Plus Shipping

Qty.
Availability: Yes


PULSE 1350MAH 3S 11.1V 75C-FPV RACING SERIES-LIPO BATTERY

PLU75-13503 - PULSE 1350MAH 3S 11.1V 75C-FPV RACING SERIES-LIPO BATTERY

New! PULSE 1350MAH 3S 11.1V 75C-FPV RACING SERIES-LIPO BATTERY

Specs:
- Voltage: 11.1V
- Cell Count: 3S (3 cells)
- Capacity: 1,350mah
- Discharge Rate: 75C
- Charge Rate: 5C
- Dimms: 73x35x23mm (LxWxH)
- Weigh: 122 +/- 5grams.

PLU75-13503

$24.99
+ Plus Shipping

Qty.
Availability: Yes


PULSE 1350mah 4S 14.8V 75C - FPV Racing Series - LiPo Battery



PLU75-13504 - PULSE 1350mah 4S 14.8V 75C - FPV Racing Series - LiPo Battery

New! PULSE 1350mah 4S 14.8V 75C - FPV Racing Series - LiPo Battery

PLU75-13504

$34.99
+ Plus Shipping

Qty.
Availability: Yes


Flysight 7inch LCD HDMI Diversity FPV Monitor w/battery & Charger




RC801-BAT - Flysight 7inch LCD HDMI Diversity FPV Monitor w/battery & Charger

New! Flysight 7inch LCD HDMI Diversity FPV Monitor w/battery & Charger
High performance 7" LCD for FPV flying with dual diversity receiver built in for portability. Including 3 piece solid plastic hood attached to monitor for sturdy performance.

Features:
- Includes Internal Battery and Charger
- Light Weight: 350g
- High Resolution: 1024 x 600
- Gloss Screen with Sunshade
- No Blue Screen with loss of Signal
- Frequency: 32ch Band, a b c d Fatshark
- Antenna: Diversity x 2
- Voltage: 7-28 volts

Ports:
- HDMI (A type)
- 1x AV in, 2x AV out Built-in Mic

Includes:
- 1x 7inch Diversity Monitor
- 2x Stock Antenna
- 1x Sun Shade
- RCA Cable and Power in and Out Cable
- Monitor Battery and Charger.

RC801-BAT

$249.99
+ Plus Shipping

Qty.
Availability: Yes


Align MR25 Racing Quad Combo-Yellow ARF Kit






RM42501XEW - Align MR25 Racing Quad Combo-Yellow ARF Kit

New! Align MR25 Racing Quad Combo-Yellow ARF (Almost ready to Fly) Kit

With all the top and modern Electronic technology, the MR25 is equipped with 7 in one: Flight Controller system, utilizes a 32 bits high speed processor that results in a highly stable and reliable performance. Providing the most effective way of system and camera setting adjustment via APP iOS & Android system, as well as with Bluetooth 4.0 compatibility featuring low power long distance high speed transmission. The ideal Tilt angle camera provide instant tilting compensation in high speed flight.
The mainly structure is uniquely designed with adjustable motor tilt angle offering flexible compensation, and customizable 256 LED colors through APP. Superb lightweight and anti-collision frame design is also capable of 3D flips by moving aileron/elevator stick to the end. This is the one you definitely need, come and take a look!

Needed For Flight:
- 3S 1,300mah to 1,800mah (And 4S) Lipo Battery
- R/C Transmitter (6 channels or more)
- Receiver (6 channels or more)
- Satelites Receiver Spektrum DSMX
- Smartphone (For App tuning)
- FPV goggle or LCD Monitor With 5.8ghz RX.
- Works withe S-BUS and Spektrum Receivers(DSMX Sat) and more.
- This version is Flat Booms style.

- Blowout Sale! PayPal Only!



RM42501XEW

$319.99
+ Plus Shipping

Qty.
Availability: Yes


Align MR25P Racing Quad Combo-GREEN ARF Kit






RM42503XSW - Align MR25P Racing Quad Combo-GREEN ARF Kit

New! Align MR25P Racing Quad Combo-GREEN ARF (Almost ready to Fly) Kit

With all the top and modern Electronic technology, the MR25 is equipped with 7 in one: Flight Controller system, utilizes a 32 bits high speed processor that results in a highly stable and reliable performance. Providing the most effective way of system and camera setting adjustment via APP iOS & Android system, as well as with Bluetooth 4.0 compatibility featuring low power long distance high speed transmission. The ideal Tilt angle camera provide instant tilting compensation in high speed flight.
The mainly structure is uniquely designed with adjustable motor tilt angle offering flexible compensation, and customizable 256 LED colors through APP. Superb lightweight and anti-collision frame design is also capable of 3D flips by moving aileron/elevator stick to the end. This is the one you definitely need, come and take a look!

Needed For Flight:
- 3S 1,300mah to 1,800mah (And 4S) Lipo Battery
- R/C Transmitter (6 channels or more)
- Receiver (6 channels or more)
- Satelites Receiver Spektrum DSMX
- Smartphone (For App tuning)
- FPV goggle or LCD Monitor With 5.8ghz RX.
- Works withe S-BUS and Spektrum Receivers(DSMX Sat) and more.
- This version is Raised Booms style.

- Blowout Sale! PayPal Only!



RM42503XSW

$319.99
+ Plus Shipping

Qty.
Availability: Yes


Nemesis 240 Mini FPV Carbon Fiber Quad Frame



RSN240-CF - Nemesis 240 Mini FPV Carbon Fiber Quad Frame

New! Nemesis 240 Mini FPV Carbon Fiber Quad Frame Kit

This is the R-Squared Innovations Nemesis 240 Mini Quadcopter Airframe. The Nemesis 240 is a mini quad designed for fast action FPV flight. This frame was engineered and developed from the ground up as a highly versatile quadcopter that retains the heart and design of the original BAH series.
Developed in the USA, this mini drone is fast and nimble, and a great choice when you want to have fun with your aircraft.
The Nemesis includes a variety of innovative features that make this aircraft unique, including an extending/folding arm configuration that allows the Nemesis to be setup in one of four configurations (X compact, H compact, X extended, & Superman type).
With either 5" or 6" props (pending configuration). Multiple camera mount options allow you to mount an FPV flight camera, in addition to a high quality camera out front to record the action (Mobius, GoPro, InfinityCam One, CCD).
The design allows a variety of electronics configurations to be used, with plenty of room for clean wire management. If you are looking for a true hot rod quad, the R-Squared Nemesis 240 should be at the top of your list.

Feautrues:

- Carbon Fiber - 128g
- Vibration free separated Clean and Dirty sections for smooth video recording
- Instantly fully inward foldable quad for easy pack and go and crash protection
- Unique custom folding and extending arm mechanism allows both 5" and 6" props
- 4 predefined flight configurations for wings, X compact, H compact, X extended & Superman
- Unique ability to dirty or clean mount your flight controller (supports 45mm and below FCs)
- Built in Mobius/GoPro1-3 mounts integrated into frame and accessories
- Designed and Engineered in the USA
- Mounting Holes for Flight Camera with casing in several positions
- Dedicated Board Camera and rear bulkhead plates
- Clean wiring, all ESCs mount inside center frame as well as flight controller
- Fits Bt408 mini PDB perfectly inside!

RSN240-CF

$142.99
+ Plus Shipping

Qty.
Availability: Call


Nemesis 240 Mini FPV G10 Quad Frame



RSN240-G10 - Nemesis 240 Mini FPV G10 Quad Frame

New! Nemesis 240 Mini FPV G-10 Quad Frame Kit

This is the R-Squared Innovations Nemesis 240 Mini Quadcopter Airframe. The Nemesis 240 is a mini quad designed for fast action FPV flight. This frame was engineered and developed from the ground up as a highly versatile quadcopter that retains the heart and design of the original BAH series.
Developed in the USA, this mini drone is fast and nimble, and a great choice when you want to have fun with your aircraft.
The Nemesis includes a variety of innovative features that make this aircraft unique, including an extending/folding arm configuration that allows the Nemesis to be setup in one of four configurations (X compact, H compact, X extended, & Superman type).
With either 5" or 6" props (pending configuration). Multiple camera mount options allow you to mount an FPV flight camera, in addition to a high quality camera out front to record the action (Mobius, GoPro, InfinityCam One, CCD).
The design allows a variety of electronics configurations to be used, with plenty of room for clean wire management. If you are looking for a true hot rod quad, the R-Squared Nemesis 240 should be at the top of your list.

Feautrues:

- G-10 - 149g
- Vibration free separated Clean and Dirty sections for smooth video recording
- Instantly fully inward foldable quad for easy pack and go and crash protection
- Unique custom folding and extending arm mechanism allows both 5" and 6" props
- 4 predefined flight configurations for wings, X compact, H compact, X extended & Superman
- Unique ability to dirty or clean mount your flight controller (supports 45mm and below FCs)
- Built in Mobius/GoPro1-3 mounts integrated into frame and accessories
- Designed and Engineered in the USA
- Mounting Holes for Flight Camera with casing in several positions
- Dedicated Board Camera and rear bulkhead plates
- Clean wiring, all ESCs mount inside center frame as well as flight controller
- Fits Bt408 mini PDB perfectly inside!

RSN240-G10

$119.99
+ Plus Shipping

Qty.
Availability: Yes


RadioLink AT9 9-Channel Radio System w/S-BUS R9D RX Mode 2






RadioLink-AT9 - RadioLink AT9 9-Channel Radio System w/S-BUS R9D RX Mode 2

New! RadioLink AT9 9-Channel Radio System w/S-BUS R9D RX Mode 2

The Radio Link AT9 System is very fast (3ms!) and Reliable 9-Channel System that supports S.Bus and Data Telemetry.
We like this RadioLink AT9 system so much, it has 9-Channels on the R9D receiver, compatible with S.Bus and Telemetry module, this is rarely seen at this price range, and best news is it's SUPER easy to use, the menu in the transmitter is straight forward, easy access and we have it setup with our multi-rotor in just few minutes, binding is easy too, just turn on the transmitter, press on hold on the receiver and there, they've bound, it's really that simple.

RadioLink-AT9

$120.99
+ Plus Shipping

Qty.
Availability: Yes


SpiroNet 5.8GHz Antenna Set (2 antennas) SMA

SN5G8RHSET - SpiroNet 5.8GHz Antenna Set (2 antennas) SMA

New! ImmersionRC SMA - SpiroNet 5.8GHz Antenna Set (2 antennas)

SN5G8RHSET

$40.00
+ Plus Shipping

Qty.
Availability: Yes


Tattu 1300mAh 75C 3S1P lipo FPV RACING Battery Pack

TA-75C-1300-3S1P-XT60 - Tattu 1300mAh 75C 3S1P lipo FPV RACING Battery Pack

New! Tattu 1300mAh 75C 3S1P lipo FPV RACING Battery Pack

Specs:
- Capacity: 1,300mah
- Voltage 11.1v (3s)
- Discharge rate: 75C
- Max burst Dischage rate: 150C
- Config: 3S1P
- Weight: 122grams
- 72x36x22.3mm (LxWxH)
- WIRE LENGTH: 100MM
- Balance tap: JST-XHR
- CONNECTOR TYPE: XT-60
- WIRE GAUGE: 12AWG

TA-75C-1300-3S1P-XT60

$26.99
+ Plus Shipping

Qty.
Availability: Yes


Tattu 1550mAh 11.1V 75C 3S1P Lipo FPV RACING Battey Pack

TA-75C-1550-3S1P-XT60 - Tattu 1550mAh 11.1V 75C 3S1P Lipo FPV RACING Battey Pack

New! Tattu 1550mAh 11.1V 75C 3S1P Lipo FPV RACING Battey Pack

Specs:
- Capacity: 1,550mah
- Voltage 11.1v (3s)
- Discharge rate: 75C
- Max burst Dischage rate: 150C
- Config: 3S1P
- Weight: 136grams
- 72x36x27mm (LxWxH)
- WIRE LENGTH: 100MM
- Balance tap: JST-XHR
- CONNECTOR TYPE: XT-60
- WIRE GAUGE: 14AWG

TA-75C-1550-3S1P-XT60

$29.00
+ Plus Shipping

Qty.
Availability: Yes


Mini 5inch FPV Mon w/DVR and 5.8ghx RC



TE968H - Mini 5inch FPV Mon w/DVR and 5.8ghx RC

New! 5inch FPV Monitor w/DVR+5.8ghz Receiver

Introducing a New look in FPV Groundstations, an all in one compact design.
With integrated bright 5inch non blue screen LCD Monitor with 5.8ghz Video Reciever and high end DVR.
Includes Built in Battery for up to 5 hours of use without charging. Can be mounted to a tripod or radio transmitter.

Features:
- AV out and AV in
- Video Playback
- Motion Detection recording
- Supports mini SD (TF) Card max 32GB
- 800 x 480 Resolution
Includes:
- 5inch Monitor With 5.8ghz RX and DVR
- Tripod adaptor
- AV out cable
- AV in cable
- AC Adaptor
- USB Cable
- 1 x Earphone

Receiver Frequencies:
- 5740 5760 5780 5800 5820 5840 5860MHZ
- Works with ImmersionRC VTX.

TE968H

$142.99
+ Plus Shipping

Qty.
Availability: YES


Flysight 5.8ghz 400mw Video Transmitter




TX5804FPV - Flysight 5.8ghz 400mw Video Transmitter

New! Flysight 400mw 5.8ghz FPV Wireless Transmitter

Features:
- 32 Channel Compatible
- Channel Display Number
- Channel Memory Function For Power-Off
- For Use with Flysight Diversity Display Monitor
- 6-28volt input
- PPM function Channel can be switched from Transmitter
- 400MW Output
- Size: 57 x 27.2 x 16mm

TX5804FPV

$79.99
+ Plus Shipping

Qty.
Availability: No


Micro 5.8ghz VTX with HD FPV Camera

TX5806FCC - Micro 5.8ghz VTX with HD FPV Camera

New! Ultra Micro 5.8ghz VTX with HD 720P FPV Camera Set

Specs:
- Weight 30g
- Power: 1S 3.7v
- Camera Resolution: 1280 x 720P
- Output Power: 25mw
- Drain: <200ma
- 4 Switchable Channels

TX5806FCC

$70.00
+ Plus Shipping

Qty.
Availability: Yes


Venom 30C 3S 1350mAh 11.1V LiPo Drone Battery with Universal 2.0 Plug




V-35021 - Venom 30C 3S 1350mAh 11.1V LiPo Drone Battery with Universal 2.0 Plug

New! Venom 30C 3S 1350mAh 11.1V LiPo Drone Battery with Universal 2.0 Plug
Great for FPV racing Quadcopters and Drones.

V-35021

$29.99
+ Plus Shipping

Qty.
Availability: Yes


Venom 75C 3S 1300mAh 11.1V Drone Racing LiPo Battery with Universal 2.0 Plug




V-35041 - Venom 75C 3S 1300mAh 11.1V Drone Racing LiPo Battery with Universal 2.0 Plug

New! Venom 75C 3S 1300mAh 11.1V Drone Racing LiPo Battery with Universal 2.0 Plug
Great for FPV Racing Quadcopters and Drones!
Arriving Late May 2016



V-35041

$28.99
+ Plus Shipping

Qty.
Availability: Yes


Venom 75C 4S 1300mAh 14.8V Drone Racing LiPo Battery with Universal 2.0 Plug




V-35044 - Venom 75C 4S 1300mAh 14.8V Drone Racing LiPo Battery with Universal 2.0 Plug

New! Venom 75C 4S 1300mAh 14.8V Drone Racing LiPo Battery with Universal 2.0 Plug
Great for FPV Racing Quadcopters and Drones!
Arriving Late May 2016



V-35044

$32.99
+ Plus Shipping

Qty.
Availability: Yes


Walkera QR W100S FPV Quad Copter RTF SET




WK-QRW100S-FPV - Walkera QR W100S FPV Quad Copter RTF SET

New! Walkera Micro-UAV with Full FPV (5.8ghz Video Transmission with Devo F4 TX w/Color Monitor)

Full RTF FPV Quad Rotor

Specs:

- Size: 170mm Motor to Motor
- 115mm Props
- Weight: 90grams w/Battery
- DEVO F4 (FPV Version 5.8 Ghz) Included
- Approximate Flight time 8 to 10min (w/1S 600mah Lipo)
- Battery and Charger Included.

WK-QRW100S-FPV

$247.50
+ Plus Shipping

Qty.
Availability: Yes


Xnova Super Sonic 1806-2300KV FPV Racing Motor Set (4pcs)




XN1806-2300 - Xnova Super Sonic 1806-2300KV FPV Racing Motor Set (4pcs)

New! Xnova Super Sonic 1806-2300KV FPV Racing Motor Set (4pcs)
Xnova motors are made from the finest components available today and guaranteed for the highest levels of performance and efficiency. Each Xnova motor is 100% hand wound and guaranteed to perform. Be convinced by the results, not just datasheets.
- High performance
- Finest CNC quality
- Ultimate efficiency
- Low cogging torque
- Smooth running
- Precise balancing
- Fully tested
- 100% hand wound.

XN1806-2300

$95.00
+ Plus Shipping

Qty.
Availability: Yes


Xnova Super Sonic 2204-2300Kv FPV Racing Motor Set (4pcs)





XN2204-2300 - Xnova Super Sonic 2204-2300Kv FPV Racing Motor Set (4pcs)

New! Xnova Super Sonic 2204-2300Kv FPV Racing Motor Set (4pcs)

The XNova 2204-2300kv engines are for FPV racing multirotor in 190/250 size (Vortex, Kylin, Anakin ... etc...)
These motors are hand wound with high quality materials, they also accept the 3s and 4s.
X-Nova is a well-known and famous brand in the RC helicopter world for its high-quality and powerful motors. The insane power for your machines to win all the races!
- High Performance and finest CNC quality
- Ultimate Efficiency
- Low Cogging torque and smooth running
- Precise balance and fully tested
- 100% Hand wound.

XN2204-2300

$100.00
+ Plus Shipping

Qty.
Availability: Yes


Xnova Super Sonic 2204-2600Kv FPV Racing Motor Set (4pcs)

XN2204-2600 - Xnova Super Sonic 2204-2600Kv FPV Racing Motor Set (4pcs)

New! Xnova Super Sonic 2204-2600Kv FPV Racing Motor Set (4pcs)

Xnova motors are made from the finest components available today and guaranteed for the highest levels of performance and efficiency. Each Xnova motor is 100% hand wound and guaranteed to perform. Be convinced by the results, not just datasheets.
- High performance
- Finest CNC quality
- Ultimate efficiency
- Low cogging torque
- Smooth running
- Precise balancing
- Fully tested
- 100% hand wound
- Up to any 5x4x3? Prop Size.

XN2204-2600

$100.00
+ Plus Shipping

Qty.
Availability: Yes


Xnova Super Sonic 2206-2000Kv FPV Racing Motor Set (4pcs)



XN2206-2000 - Xnova Super Sonic 2206-2000Kv FPV Racing Motor Set (4pcs)

New! Xnova Super Sonic 2206-2000Kv FPV Racing Motor Set (4pcs)

The XNova 2206-2000kv engines are for FPV racing multirotor in 190/250 size FPV Racing Drone/Quad
These motors are hand wound with high quality materials, they also accept the 3s and 4s.

XN2206-2000

$118.00
+ Plus Shipping

Qty.
Availability: Yes


Xnova Super Sonic 2206-2300Kv FPV Racing Motor Set (4 pcs)




XN2206-2300 - Xnova Super Sonic 2206-2300Kv FPV Racing Motor Set (4 pcs)

New! Xnova Super Sonic 2206-2300Kv FPV Racing Motor Set (4 pcs)

The XNova 2206-2300kv engines are for FPV racing multirotor in 190/250 size (Vortex, Kylin, Anakin ... etc...)
These motors are hand wound with high quality materials, they also accept the 3s and 4s.


XN2206-2300

$118.00
+ Plus Shipping

Qty.
Availability: Yes


Xnova Super Sonic 2206-2500Kv FPV Racing Motor Set (4pcs)

XN2206-2500 - Xnova Super Sonic 2206-2500Kv FPV Racing Motor Set (4pcs)

New! Xnova Super Sonic 2206-2500Kv FPV Racing Motor Set (4pcs)

Xnova motors are made from the finest components available today and guaranteed for the highest levels of performance and efficiency. Each Xnova motor is 100% hand wound and guaranteed to perform. Be convinced by the results, not just datasheets.
- High performance
- Finest CNC quality
- Ultimate efficiency
- Low cogging torque
- Smooth running
- Precise balancing
- Fully tested
- 100% hand wound
- Up to any 5x4x3? Prop Size.

XN2206-2500

$118.00
+ Plus Shipping

Qty.
Availability: Yes

© AddictiveRC LLC - All Rights Reserved | Website Development and Design by TYCOMM.NET