AddictiveRC - Everything Radio Controlled
  Return to AddictiveRC Home Page Custom Built Multirotor UAV's ARF - Almost Ready to Fly Multirotor UAV's RTF - Ready to Fly Multirotor UAV's   AddictiveRC - 520-429-6493 Contact Us Online
  Main Page | Members | Photos | Videos | Forum | Blogs | Chat | Events | Groups  

AeroXcraft X55 Extended Aluminium Arm-Black For DJI Frames

AXCR-ARM-X55-BLACK - AeroXcraft X55 Extended Aluminium Arm-Black For DJI Frames

New! AeroXcraft X55 Extended Aluminium Arm-Black For DJI Frames

Designed to Fit Up to 12inch props on the DJI F-550 Frame

Features:

- Designed and manufactured in the UK exclusively by Aeroxcraft.
- Maximum prop size 12 inches (305mm).
- Weight: 60g (2.1oz).
- Same height as stock arms at 37mm.
- Compatible with DJI M2.5 shoulder screws.
- Suits motors with hole patterns sizes 16mm to 25mm.
- Manufactured from aircraft grade 6082-T6 Aluminum.
- Designed to withstand 9kg (19.8 lbs) load.
- Metal fatigue tested to 250,000 cycles of 9kg (19.8 lbs).
- Arm acts as a heat sink for the motor and ESC.
- Many times stiffer than stock plastic arms.

Includes:
- 1 x X55 Arm.
- 2 x Velcro ESC straps.

AXCR-ARM-X55-BLACK

$36.00
+ Plus Shipping

Qty.
Availability: Yes


AeroXcraft X55 Extended Aluminium Arm-Blue For DJI Frames

AXCR-ARM-X55-BLUE - AeroXcraft X55 Extended Aluminium Arm-Blue For DJI Frames

New! AeroXcraft X55 Extended Aluminium Arm-Blue For DJI Frames

Designed to Fit Up to 12inch props on the DJI F-550 Frame

Features:

- Designed and manufactured in the UK exclusively by Aeroxcraft.
- Maximum prop size 12 inches (305mm).
- Weight: 60g (2.1oz).
- Same height as stock arms at 37mm.
- Compatible with DJI M2.5 shoulder screws.
- Suits motors with hole patterns sizes 16mm to 25mm.
- Manufactured from aircraft grade 6082-T6 Aluminum.
- Designed to withstand 9kg (19.8 lbs) load.
- Metal fatigue tested to 250,000 cycles of 9kg (19.8 lbs).
- Arm acts as a heat sink for the motor and ESC.
- Many times stiffer than stock plastic arms.

Includes:
- 1 x X55 Arm.
- 2 x Velcro ESC straps.

AXCR-ARM-X55-BLUE

$36.00
+ Plus Shipping

Qty.
Availability: Yes


AeroXcraft X55 Extended Aluminium Arm-Red For DJI Frames

AXCR-ARM-X55-RED - AeroXcraft X55 Extended Aluminium Arm-Red For DJI Frames

New! AeroXcraft X55 Extended Aluminium Arm-Red For DJI Frames

Designed to Fit Up to 12inch props on the DJI F-550 Frame

Features:

- Designed and manufactured in the UK exclusively by Aeroxcraft.
- Maximum prop size 12 inches (305mm).
- Weight: 60g (2.1oz).
- Same height as stock arms at 37mm.
- Compatible with DJI M2.5 shoulder screws.
- Suits motors with hole patterns sizes 16mm to 25mm.
- Manufactured from aircraft grade 6082-T6 Aluminum.
- Designed to withstand 9kg (19.8 lbs) load.
- Metal fatigue tested to 250,000 cycles of 9kg (19.8 lbs).
- Arm acts as a heat sink for the motor and ESC.
- Many times stiffer than stock plastic arms.

Includes:
- 1 x X55 Arm.
- 2 x Velcro ESC straps.

AXCR-ARM-X55-RED

$36.00
+ Plus Shipping

Qty.
Availability: Yes


AeroXcraft X55 Extended Aluminium Arm-Silver For DJI Frames

AXCR-ARM-X55-SILVER - AeroXcraft X55 Extended Aluminium Arm-Silver For DJI Frames

New! AeroXcraft X55 Extended Aluminium Arm-Silver For DJI Frames

Designed to Fit Up to 12inch props on the DJI F-550 Frame

Features:

- Designed and manufactured in the UK exclusively by Aeroxcraft.
- Maximum prop size 12 inches (305mm).
- Weight: 60g (2.1oz).
- Same height as stock arms at 37mm.
- Compatible with DJI M2.5 shoulder screws.
- Suits motors with hole patterns sizes 16mm to 25mm.
- Manufactured from aircraft grade 6082-T6 Aluminum.
- Designed to withstand 9kg (19.8 lbs) load.
- Metal fatigue tested to 250,000 cycles of 9kg (19.8 lbs).
- Arm acts as a heat sink for the motor and ESC.
- Many times stiffer than stock plastic arms.

Includes:
- 1 x X55 Arm.
- 2 x Velcro ESC straps.

AXCR-ARM-X55-SILVER

$36.00
+ Plus Shipping

Qty.
Availability: Yes


3K Carbon Fiber Plate - 480 x 310 x 1.5mm

CFS-1_5X480X310 - 3K Carbon Fiber Plate - 480 x 310 x 1.5mm

3K Carbon Fiber Plate - 480 x 310 x 1.5mm

Usable area (estimated): 480 x 310

CFS-1_5X480X310

$64.00
+ Plus Shipping

Qty.
Availability: No


Custom CF Quick Release Plate For Align Rail Spacing

CUSTOM-QR_Mount - Custom CF Quick Release Plate For Align Rail Spacing

Custom Made For Align 110mm Rail Spacing
Fits Align M690L and M480L Multicopters.

Specs:
- Aluminum QR Clamps for 12mm Rails
- 3mm Thick Carbon Fiber Plate for Zero Flex
- Pre-Drilled holes for 100mm x 100mm Vibration Damper Sysyems.

Dimensions:
- 154mm x 109mm x 3mm CF Plate (WxD).

Perfect for Mounting Other Gimbal Systems to Align Mulicopter Rail Systems.

CUSTOM-QR_Mount

$185.00
+ Plus Shipping

Qty.
Availability: Yes


Holybro Race32 Racing Flight Controller F303 (Naze32 F3 w/Baro)


HB-11015 - Holybro Race32 Racing Flight Controller F303 (Naze32 F3 w/Baro)

New! Holybro Race32 Racing Flight Controller F303 (Naze32 F3 w/Baro)

Features:
- 36x36mm board with 30.5mm mounting holes
- Weight: 5 grams
- STM32F303 CPU with FPU 256kB flash
- 8MB (64Mbit) High-Capacity Flash
- MPU6050 accelerometer/gyro
- MS5611 barometer (Deluxe only)
- HMC5983 magnetometer (Compass Sensor, Deluxe only)
- Micro USB socket
- 2x 6pin JST-SH sockets (PWR,GPS/I2C)
- 3x 4pin JST-SH sockets (OSD/TELEMTRY,UART3/ SERIAL RX,LED,RSSI)
- 1x 8pin JST-SH sockets (PPM,PWM,5V,GND)
- 1x 10pin JST-SH sockets (ESC/Servo connections, 5V, GND)
- 4x 3pin though-holes for pin headers for ESC/Servo connections
- 1x 2pin though-holes for pin headers for buzzer
- 1x 3pin JST-ZH sockets (sat.DSM).

HB-11015

$39.99
+ Plus Shipping

Qty.
Availability: Yes


Holybro Rice32 Micro Racing Flight Controller (Naze32 F3 with baro)


HB-11016 - Holybro Rice32 Micro Racing Flight Controller (Naze32 F3 with baro)

New! Holybro Rice32 Micro Racing Flight Controller (Naze32 F3 with baro)

Features:
- 30x18mm board
- 5 grams
- STM32F303 CPU with FPU 256kB flash
- 8MB (64Mbit) High-Capacity Flash
- MPU6050 accelerometer/gyro
- MS5611 barometer (Deluxe only)
- HMC5983 magnetometer (Compass Sensor, Deluxe only)
- Micro USB socket
- 2x 6pin JST-SH sockets (PWR,GPS/I2C)
- 3x 4pin JST-SH sockets (OSD/TELEMTRY,UART3/ SERIAL RX,LED,RSSI)
- 1x 8pin JST-SH sockets (PPM,PWM,5V,GND)
- 1x 10pin JST-SH sockets (ESC/Servo connections, 5V, GND)
- 4x 3pin though-holes for pin headers for ESC/Servo connections
- 1x 2pin though-holes for pin headers for buzzer
- 1x 3pin JST-ZH sockets (sat.DSM).

HB-11016

$39.99
+ Plus Shipping

Qty.
Availability: Yes


HP SILICONE 10AWG WIRE 1M

HP-SCWIRE10 - HP SILICONE 10AWG WIRE 1M

New! HYPERION HIGH QUALITY SILICONE WIRE. SET OF RED-BLACK, 1-METER 10AWG WIRE

HP-SCWIRE10

$12.00
+ Plus Shipping

Qty.
Availability: Yes


HP SILICONE 12AWG WIRE 1M

HP-SCWIRE12 - HP SILICONE 12AWG WIRE 1M

New! HYPERION HIGH QUALITY SILICONE WIRE. SET OF RED-BLACK, 1-METER 12AWG WIRE

HP-SCWIRE12

$7.50
+ Plus Shipping

Qty.
Availability: Yes


HP SILICONE 14AWG WIRE 1M

HP-SCWIRE14 - HP SILICONE 14AWG WIRE 1M

New! HYPERION HIGH QUALITY SILICONE WIRE. SET OF RED-BLACK, 1-METER 14AWG WIRE

HP-SCWIRE14

$4.99
+ Plus Shipping

Qty.
Availability: Yes


HP SILICONE 18AWG WIRE IM

HP-SCWIRE18 - HP SILICONE 18AWG WIRE IM

New! HYPERION HIGH QUALITY SILICONE WIRE. SET OF RED-BLACK, 1-METER 18AWG WIRE

HP-SCWIRE18

$2.99
+ Plus Shipping

Qty.
Availability: Yes


ALIGN PU ADHESIVE GEL

K10457A - ALIGN PU ADHESIVE GEL

ALIGN PU ADHESIVE GEL

PU adhesive gel is a material that possess excellent vibration dampening characteristics, ideal for mounting gyroscopes, receivers, or other electronics in vibration prone areas. The gel can be re-used by cleaning off containment (such as dust) with water. Mild detergent can also be used to wash away oily residues. Once dried the gel will regain its adhesiveness. The PU adhesive gel is an ideal replacement for traditional gyro foam tape. Its excellent vibration dampening characteristic can minimize impact induced damages on electronics.

Specifications:
- Material PU GEL

Accessories:
- PU Adhesive Gel x 1
- Hook & loop fastening tape x 2.

K10457A

$10.25
+ Plus Shipping

Qty.
Availability: Yes


VulcanUAV Silicone Gel Vibration Sheet

V-GEL-01 - VulcanUAV Silicone Gel Vibration Sheet


The VulcanUAV Silicone gel sheet for mounting of components and equipment sensitive to vibration or shock, such as IMUs, flight controllers, gyros etc. The sheet is coated with double sided, strong 3M adhesive to ensure a firm mounting. Offers excellent shock resistance is is non conductive.
Sheet Size: 150mm x 50mm
Thinkness: 2mm
Color: Black or Clear.

V-GEL-01

$11.25
+ Plus Shipping

Qty.
Availability: Yes

© AddictiveRC LLC - All Rights Reserved | Website Development and Design by TYCOMM.NET