AddictiveRC - Everything Radio Controlled
  Return to AddictiveRC Home Page Custom Built Multirotor UAV's ARF - Almost Ready to Fly Multirotor UAV's RTF - Ready to Fly Multirotor UAV's   AddictiveRC - 520-429-6493 Contact Us Online

Cobra 11A ESC W/2A Linera BEC

CBDL-11A - Cobra 11A ESC W/2A Linera BEC

Cobra 11A ESC W/2A Linera BEC

Cobra Speed Controllers are designed with a relentless pursuit of exceptional product quality. These speed controllers are the perfect compliment to a Cobra Brushless motor, and they will also work with virtually any other brushless motor on the market as well. Cobra Speed Controllers are built from the best components available to provide the user with long life and trouble-free operation.
Cobra Speed Controllers are simple to program, and in most cases, they can be used right out of the package. Three of the Speed Controller parameters can be set without a programming card: Brake Mode, Battery Type, and Timing mode. The remaining parameters can be set with the optional ESC Programming Card, which is available separately.
All of the Cobra Speed Controllers come with an internal BEC circuit to power your radio receiver and servos. The 11A and 22A models come with a 5.0 volt linear BEC rated for 2 amps of current. The 33A model comes with a 5.5 volt switching type BEC rated for 3 amps of current. The 40A, 60A, 80A, 100A and 150A models come with a 5.5 volt switching BEC rated for 6 amps of current to handle the power needs of the larger digital servos.
Since the Cobra 11A ESC is typically used in smaller 2 to 3-cell powered indoor aircraft, where most users solder the motor directly to the ESC to save weight, no bullet connectors are provided on the motor output leads. The leads are provided pre-tinned ready to solder.

Cobra 11 Amp Speed Controller Specifications:

• Weight: 9.9g
• Max Cont. Current: 11amps
• Burst Current rating (15sec): 14amps
• Operating Voltage: 6 to 12volts
Li-Po Cells: 2 to 3S
• BEC output: 2amps at 5v
• ESC Size (Incl Caps): 30 x 18 x 10mm.

CBDL-11A

$20.00
+ Plus Shipping

Qty.
Availability: Good


Castle Creations Phoenix ICE ESC 100A 33.6V - Heli/Sport Airplane

CSEM6100 - Castle Creations Phoenix ICE ESC 100A 33.6V - Heli/Sport Airplane

Phoenix Ice brings the ability to run at input voltages of up to 8S* (33.6) and use the built in switching BEC to output up to 5 amps of servo power all the way up to the 8S max.
Switching BEC The Phoenix Ice switching BEC output is factory set to 5.0V. Users may use Castle Link to select their desired voltage between 5.0V and 7.0V, in 0.1V increments.
Data Logging Ice brings another incredibly useful feature, extensive data logging capabilities. The controllers are able to measure and record many parameters at sample rates that you choose between 10 samples per second and 1 sample per second. Data points include:
• Battery Voltage
• Battery Ripple
• Battery Current
• Controller Temperature
• Controller Input Throttle
• Controller Motor Power Output
• Motor RPM

This data is stored directly in the controller and may be accessed once the run is over using the Castle Link USB adapter (sold separately) and Castle Link software (available free at castlecreations.com). The Max Log Size is 21,504 bytes, everything takes one byte except for motor rpm which takes two.
• Logging 'Battery Current' at only a 1 sample / second - 358 minutes of logging time (almost 6 hrs)
• Logging 'Motor RPM' at only 1 sample / second - 179 minutes of logging time
• Logging everything at only 1 sample / second - 44 minutes of logging time
• Logging everything at 10 samples / second - 4 minutes and 28 seconds
SPECS:
• Length: 2.6" (66mm)
• Width: 1.3" (33mm)
• Height: 0.9" (22.9mm)
• Weight: 2 oz (56.7g)
• Max Amps: 100A, 5A BEC
• Max Volts: 34V (8S Lipo, 22S NiCd/NiMH).

CSEM6100

$142.99
+ Plus Shipping

Qty.
Availability: Good


Feigao 18 Amp Brushless Speed Controller

FG-BLESC-18A - Feigao 18 Amp Brushless Speed Controller
Features
Programmable through transmitter or with the Feigao Speed Controller Programing Card (Sold Separately)
2 Amp BEC use up to 11.1V if using at 14.8V disable BEC
Brake on/off
Hard/soft cut-off
3 Li-Poly Auto-Cutoff voltages 2.5V/2.75V/3.0V per cell
Normal/Soft/Super Soft startup
Low/Medium/High timing
Safe start requires throttle stick to be fully down in order to arm motor
Alerts you when battery pack voltage is out of range or when throttle signal is out of range
Auto throttle shutoff on loss of signal
Thermal overload protection
Failed startup protection - automatically cuts power if motor fails to start.

FG-BLESC-18A

$30.00
+ Plus Shipping

Qty.
Availability: Good


Feigao Brushless 6amp Speed Controller

FGBLESC6A - Feigao Brushless 6amp Speed Controller
Features
Programmable through transmitter
Brake on/off
Hard/soft cut-off
3 Li-Poly Auto-Cutoff voltages
2.5V/2.75V/3.0V per cell
Normal/Soft/Super-Soft startup
Low/Medium/High timing
Safe start requires throttle stick to be fully down in order to arm motor
Alerts you when battery pack voltage is out of range or when throttle signal is out of range
Auto throttle shutoff on loss of signal
Thermal overload protection
Failed startup protection - automatically cuts power if motor fails to start

FGBLESC6A

$17.95
+ Plus Shipping

Qty.
Availability: Good


HobbyWing 18A FLYFUN Brushless ESC BEC 5V2A - HDX300Blade CP (Version 4.1)

FLYFUN-18A-V4 - HobbyWing 18A FLYFUN Brushless ESC BEC 5V2A - HDX300Blade CP (Version 4.1)

HobbyWing FLYFUN Brushless ESC 18A (Version 4.1)

FLyfun-18A-HV (Version 4.1) is the new product in the "FLyfun" series. Compared with its previous version (V3.1), the new version product has obvious improvements at the following items: The quicker throttle response, the better compatibility with various of motors, the softer start effect for helicopter, the better ability for anti RF interference.

Specs:
• Output: Continues 30A, Burst 40A up to 10 Secs.
• Input Voltage: 5.6V --- 16.8V ( Lithium : 2 - 4s or NiMH/NiCd 5 -12 Cells)
• BEC (Battery Elimination Circuit) Output linear mode BEC 2A
• Size: 24mm x 45mm x 11mm (WxLxH)
• Weight: 19g

FLYFUN-18A-V4

$21.00
+ Plus Shipping

Qty.
Availability: Good


HobbyWing FLYFUN Brushless ESC 30A (Version 4.1)

FLYFUN-30A-V4 - HobbyWing FLYFUN Brushless ESC 30A (Version 4.1)

HobbyWing FLYFUN Brushless ESC 30A (Version 4.1)

FLyfun-30A-HV (Version 4.1) is the new product in the "FLyfun" series. Compared with its previous version (V3.1), the new version product has obvious improvements at the following items: The quicker throttle response, the better compatibility with various of motors, the softer start effect for helicopter, the better ability for anti RF interference.

Specs:
• Output: Continues 30A, Burst 40A up to 10 Secs.
• Input Voltage: 5.6V --- 16.8V ( Lithium : 2 - 4s or NiMH/NiCd 5 -12 Cells)
• BEC (Battery Elimination Circuit) Output linear mode BEC 2A
• Size: 24mm x 45mm x 11mm (WxLxH)
• Weight: 25g

FLYFUN-30A-V4

$26.00
+ Plus Shipping

Qty.
Availability: Good


Hacker X-12 Pro 12amp ESC

H-X-12PROESC - Hacker X-12 Pro 12amp ESC

Hacker X-12 Pro 12amp ESC
The X-Pro Series of Controllers, are sensorless speed controllers especially designed for the 'Hacker Brushless A-Series' motors and other Brushless motor designs. Special programming options are provided to ensure the best possibible power and performance from your motor system.
Specs:
Operating Current:12A
Peak Current:16A
Weight: 0.71 oz.
Length:1.6500 in.
Width: 0.9100 in.
Details:
NiMH Cells:10
LiPo Cells: 3
BEC: Yes
BEC Current: 2.00 amps
Programmable:Yes with X-Pro Link

H-X-12PROESC

$35.00
+ Plus Shipping

Qty.
Availability: Good


Hacker X-20 Pro 20amp ESC

H-X-20PROESC - Hacker X-20 Pro 20amp ESC

Hacker X-20 Pro 20amp ESC
The X-Pro Series of Controllers, are sensorless speed controllers especially designed for the 'Hacker Brushless A-Series' motors and other Brushless motor designs. Special programming options are provided to ensure the best possibible power and performance from your motor system.
Specs:
Operating Current: 20A
Peak Current: 25A
Weight:0.57 oz.
Length:1.6500 in.
Width:0.9100 in
Details:
NiMH Cells:10
LiPo Cells: 3
BEC: Yes
BEC Current:3.0000A
Programmable:Yes with X-Pro Link

H-X-20PROESC

$40.00
+ Plus Shipping

Qty.
Availability: Good


Hacker X-30 Pro 30amp ESC

H-X-30PROESC - Hacker X-30 Pro 30amp ESC

Hacker X-30 Pro 30amp ESC
The X-Pro Series of Controllers, are sensorless speed controllers especially designed for the 'Hacker Brushless A-Series' motors and other Brushless motor designs. Special programming options are provided to ensure the best possibible power and performance from your motor system.
Specs:
Operating Current:30A
Peak Current: 35A
Weight: 1.06 oz.
Length: 2.0100 in.
Width: 0.9100 in.
Details:
NiMH Cells:10
LiPo Cells: 3
BEC: Yes
BEC: Current: 2A
Programmable: Yes with X-Pro Link

H-X-30PROESC

$55.00
+ Plus Shipping

Qty.
Availability: Good


Hacker X-7 Pro 7amp ESC

H-X-7PROESC - Hacker X-7 Pro 7amp ESC

Hacker X-7 Pro 7amp ESC
The X-Pro Series of Controllers, are sensorless speed controllers especially designed for the 'Hacker Brushless A-Series' motors and other Brushless motor designs. Special programming options are provided to ensure the best possibible power and performance from your motor system.
Specs:
• Operating Current 7A
• Peak Current 10amps
• Weight 0.35 Oz.
• Length 1.4 Inches.
• Width 0.9 Inches
• Lipo cells 3s
• BEC True
• Programming Method X-Pro-Link
Use with Hacker A20-50S, A10-9L Brushless Motors.

H-X-7PROESC

$30.00
+ Plus Shipping

Qty.
Availability: Good


HYPERION TITAN 20A HI-PRO BRUSHLESS ESC

HP-TITAN-20P - HYPERION TITAN 20A HI-PRO BRUSHLESS ESC
Transmitter Stick Programmable Functions
Brake Modes: On / Off
Battery Type: NiMH-NiCd / 2S-3S Li-Po
Switching Frequency: 8 kHz / 16 kHz
Timing Modes: Auto / 7 deg / 30 deg
Motor Rotation: Reverse Off / Reverse On
LVC Cutoff Modes: Hard - Stop / Soft - Reduce Power / NO CUT
RPM Control (Governor): Off / Range 1 / Range 2 / Range 3

Hyperion Emeter or PC Software for TITAN can also program the settings below:
NiCd/NiMH per cell cutoff voltage: 0.6V / 0.7V / 0.8V / 0.9V
Lithium per cell cutoff voltage: 2.0V to 3.2V, in 0.1V steps

Hardware Specs:
5.0V 1.0~3.0A BEC Circuit (5 servos max at 7.4V)
Over-Temp Protection: Soft Cutoff at 80C
Max Commutations: 345,240
Voltage Ranges: 5~10 cells Ni~, 2~3 Cells Lithium
Current Continuous / Peak: As Rated / +20%
Weight:18.1g
Board Size:38 x 24 x 7.5.

HP-TITAN-20P

$49.99
+ Plus Shipping

Qty.
Availability: Good


Turnigy HV SBEC 5A Regulator BEC

HVSBEC - Turnigy HV SBEC 5A Regulator BEC

New! Turnigy HV SBEC 5A Regulator BEC

The Turnigy HV SBEC 5A Switch Regulator is perfect for large electric models using high voltage power setups. With its high voltage (8-42V) input capability, you will have the option to run this unit off of your main battery or off a separate 2-10S lipo. This voltage regulator will provide a sustained 4A output at 5V or 6V, and has a max current capability of 5A.

Specs:
- Input Voltage: 8-42Volts
- Output Voltage: 5v or 6V (User Selectable)
- Max Load: 4amp Cont. 5A Max
- Weight: 21g
- Size: 59x10x25mm

HVSBEC

$10.45
+ Plus Shipping

Qty.
Availability: Yes


HOBBYWING FLY FUN 12A BRUSHLESS SPEED CONTROLLER


HW-FF12A - HOBBYWING FLY FUN 12A BRUSHLESS SPEED CONTROLLER

New! HOBBYWING FLY FUN 12A BRUSHLESS SPEED CONTROLLER.

HW-FF12A

$17.50
+ Plus Shipping

Qty.
Availability: Yes


HobbyWing 10amp ESC

HW10A-ESC - HobbyWing 10amp ESC

HobbyWing 10amp Speed Controller

Specs:
• Output: 10A, Burst 12A up to 10Secs.
• Input: 2 to 4 Cells Li-Po
• BEC: 1A/5V Linear mode
• Size: 27mm x 17mm x 6mm
• Weight: 9g.

Features:
Military Spec Components!

HW10A-ESC

$17.00
+ Plus Shipping

Qty.
Availability: Good


Scorpion Commander V2 45 amp ESC (2-4S)

ID-ESC45 - Scorpion Commander V2 45 amp ESC (2-4S)
Scorpion Commander Series Brushless Speed Controllers represent one of the best values in the speed controller market today. From the beautiful gold anodized heatsinks, to the unique metal containers that the ESC's are shipped in, everything about Scorpion Speed Controllers shows the company's commitment to quality. These ESC's are manufactured from top quality components, in a state of the art manufacturing facility, and are designed to provide years of trouble free operation.
The V2 models of Scorpion Sommander Speed Controllers contain new Helicopter programming that includes Soft-Start and Governor modes. The Soft-Start features 3 different user selectable spool-up times of 10, 15 and 20 seconds. The Governor mode allows for settings of 50, 60, 70, 80, or 90 percent throttle. Another update is a revised LVC feature that is no longer cell dependent. With the new LVC system, any value can be selected from 5.0 to 13.8 volts in 0.2 volt increments.
Also included with the V2 model ESC's is the exclusive Scorpion Wireless Programming System. This system includes a postage stamp size Infrared receiver module and a credit card size wireless remote transmitter. With this programming system, you do not need to unplug any wires or need to drag out a computer or cable to change the settings on your speed controller. The Scorpion Wireless Programming System makes changing your ESC parameters as easy as changing the channel on your TV. The adjustable parameters on every Scorpion ESC include: Battery Type, Cell Count, Low Voltage Cut-off Level, Power Cut-off Type, Current Overload Protection, Braking Level, Acceleration Time Delay, Helicopter or Airplane Mode, Soft Start Mode, Soft Start Duration, Governor Mode, PWM Frequency Selection, Timing Advance and Motor Rotation.
Scorpion Speed Controllers also include all of the ESC parameters clearly labeled on the heatsink assembly. Voltage range, current rating, BEC rating, Ni-XX and Li-Po cell count and input polarity are all clearly marked to avoid any confusion. Scorpion Commander Series Speed Controllers are also backed by a 2 year manufacturers warranty against defects in materials and workmanship, so you can buy with confidence. For a total package of Quality, Performance and Value, use Scorpion Brushless Speed Controllers.

Specifications
Weight (Without Connectors) ................. 41.5 gm (1.46 oz)
Max Continuous Current ..................................... 45 Amps
Operating Voltage Range ............................... 6 to 15 Volts
Max BEC Output ...................................... 4 Amps at 6.0 V
On Resistance .............................................. 2.33 mOhms
Size ....................... 75 x 30 x 9 mm (2.95 x 1.18 x 0.35 in).

ID-ESC45

$67.99
+ Plus Shipping

Qty.
Availability: Good


Scorpion Commander V2 55 amp ESC (2-4S)

ID-ESC55 - Scorpion Commander V2 55 amp ESC (2-4S)
Scorpion Commander Series Brushless Speed Controllers represent one of the best values in the speed controller market today. From the beautiful gold anodized heatsinks, to the unique metal containers that the ESC's are shipped in, everything about Scorpion Speed Controllers shows the company's commitment to quality. These ESC's are manufactured from top quality components, in a state of the art manufacturing facility, and are designed to provide years of trouble free operation.
The V2 models of Scorpion Sommander Speed Controllers contain new Helicopter programming that includes Soft-Start and Governor modes. The Soft-Start features 3 different user selectable spool-up times of 10, 15 and 20 seconds. The Governor mode allows for settings of 50, 60, 70, 80, or 90 percent throttle. Another update is a revised LVC feature that is no longer cell dependent. With the new LVC system, any value can be selected from 5.0 to 13.8 volts in 0.2 volt increments.
Also included with the V2 model ESC's is the exclusive Scorpion Wireless Programming System. This system includes a postage stamp size Infrared receiver module and a credit card size wireless remote transmitter. With this programming system, you do not need to unplug any wires or need to drag out a computer or cable to change the settings on your speed controller. The Scorpion Wireless Programming System makes changing your ESC parameters as easy as changing the channel on your TV. The adjustable parameters on every Scorpion ESC include: Battery Type, Cell Count, Low Voltage Cut-off Level, Power Cut-off Type, Current Overload Protection, Braking Level, Acceleration Time Delay, Helicopter or Airplane Mode, Soft Start Mode, Soft Start Duration, Governor Mode, PWM Frequency Selection, Timing Advance and Motor Rotation.
Scorpion Speed Controllers also include all of the ESC parameters clearly labeled on the heatsink assembly. Voltage range, current rating, BEC rating, Ni-XX and Li-Po cell count and input polarity are all clearly marked to avoid any confusion. Scorpion Commander Series Speed Controllers are also backed by a 2 year manufacturers warranty against defects in materials and workmanship, so you can buy with confidence. For a total package of Quality, Performance and Value, use Scorpion Brushless Speed Controllers.

Specifications
Weight (Without Connectors) ................. 43.7 gm (1.54 oz)
Max Continuous Current .................................... 55 Amps
Operating Voltage Range .............................. 6 to 15 Volts
Max BEC Output ...................................... 4 Amps at 5.0 V
On Resistance ............................................. 1.56 mOhms
Size ...................... 79 x 30 x 9 mm (3.11 x 1.19 x 0.35 in).

ID-ESC55

$79.99
+ Plus Shipping

Qty.
Availability: Good


KDE DIRECT XF UAS LV MULTI-ROTOR 20A+ ESC



KDEXF-UAS20LV - KDE DIRECT XF UAS LV MULTI-ROTOR 20A+ ESC

New! KDE DIRECT XF UAS LV MULTI-ROTOR 20A+ ESC

Programming: Proprietary Algorithm, 600Hz Refresh, Dynamic Advance Timing

Includes:
- Two (2) KDE Direct XF 3.5mm 24K Bullet Connectors (Pair, Male/Female)
- Product designed and quality-inspected in the United States and manufactured in China.

KDEXF-UAS20LV

$40.95
+ Plus Shipping

Qty.
Availability: Yes


KDE Direct XF UAS 35amp Brushless Multi-Rotor ESC



KDEXF-UAS35 - KDE Direct XF UAS 35amp Brushless Multi-Rotor ESC

New! KDE Direct XF UAS Multi-Rotor 35amp+ ESC

The UAS series is compatible with 2S - 8S LiPo (7.4V to 29.8V) power systems - allowing for the next level of performance and efficiency for your SUAS and Multi-Rotor applications.
ESCs include 200C, 15 AWG silicone-wire power leads and 15 AWG silicone-wire motor leads with dual 4.0mm and 3.5mm 24K matching Bullet Connectors.

KDEXF-UAS35

$58.95
+ Plus Shipping

Qty.
Availability: Yes


KDE Direct XF UAS 55amp Brushless Multi-Rotor ESC



KDEXF-UAS55 - KDE Direct XF UAS 55amp Brushless Multi-Rotor ESC

New! KDE Direct XF UAS Multi-Rotor 55amp+ ESC

The UAS series is compatible with 2S - 8S LiPo (7.4V to 29.8V) power systems - allowing for the next level of performance and efficiency for your SUAS and Multi-Rotor applications.
ESCs include 200C, 14 AWG silicone-wire power leads and 15 AWG silicone-wire motor leads with dual 4.0mm and 3.5mm 24K matching Bullet Connectors.

KDEXF-UAS55

$87.95
+ Plus Shipping

Qty.
Availability: Yes


KDE Direct XF UAS 75amp Brushless Multi-Rotor ESC


KDEXF-UAS75HV - KDE Direct XF UAS 75amp Brushless Multi-Rotor ESC

New! KDE Direct XF UAS 75amp Brushless Multi-Rotor ESC.

KDEXF-UAS75HV

$146.95
+ Plus Shipping

Qty.
Availability: Yes


KDE 75AMP+ HV MULTI-ROTOR ESC





KDEXF-UAS75HVC - KDE 75AMP+ HV MULTI-ROTOR ESC

New! KDE 75AMP+ High Voltage MULTI-ROTOR ESC

KDEXF-UAS75HVC

$148.99
+ Plus Shipping

Qty.
Availability: Yes


KDE 95AMP+ HV MULTI-ROTOR ESC





KDEXF-UAS95HVC - KDE 95AMP+ HV MULTI-ROTOR ESC

New! KDE 95AMP+ High Voltage MULTI-ROTOR ESC

KDEXF-UAS95HVC

$195.99
+ Plus Shipping

Qty.
Availability: Yes


Maytech 30amp BEC Speed Controller

MT-30A-BEC-V1 - Maytech 30amp BEC Speed Controller

Maytech 30amp BEC ESC Harrier-Supreme V1 Series BEC Speed Controller

Specs:
- Cont. Current: 30 amps
- Burst Current: 40amps
- Weight: 29g
- Size: L:43 x 25 x 11mm
- Lipo: 2-4Cells
- BEC: 5V/3A Linear Mode
- Program Device: TX/Program Card.

MT-30A-BEC-V1

$32.97
+ Plus Shipping

Qty.
Availability: Good


MayTech 30A Opto Brushless ESC with Simon K FW V1

MT-30A-OPTO-SK - MayTech 30A Opto Brushless ESC with Simon K FW V1

MayTech 30A Opto Brushless ESC with Simon K Firmware.
Specs:
- Cont. Current: 30 amps
- Burst Current: 40 amps
- Size: L:43 x 25 x 11mm
- Lipo: 2-4 Cells
Opto: No Programming Needed.
Best Application For: DJI Multi-Rotor Stabilization Controllers.

MT-30A-OPTO-SK

$37.50
+ Plus Shipping

Qty.
Availability: Good


MayTech 35amp HV Opto Eagle-Multi ESC with SK FW

MT-35A-OPTO-MK - MayTech 35amp HV Opto Eagle-Multi ESC with SK FW


New! Maytech Eagle-Multi Series 35amp Opto ESC with Simon K Firmware
New Multi-Copter Series ESC From Maytech
Specs:
- Cont. Current 35amps
- Burst Current (10sec) 50amps
- 2-4 Cells Lipo No BEC
- Size: 56mm x 25.5mm x 10mm.

MT-35A-OPTO-MK

$42.50
+ Plus Shipping

Qty.
Availability: Good


Maytech 40amp OPTO Speed Controller with Simon K Firmware

MT-40A-OPTO-SK - Maytech 40amp OPTO Speed Controller with Simon K Firmware

Maytech 40amp OPTO Simon K FW ESC Harrier-Supreme V1 Series OPTO Speed Controller
Excellent MayTech Quality Paired with Excellent Simon K Firmware
Optimized Firmware for Multi-Rotor Applications.
This ESC is Totally Plug and Play! All Programming is Accomplished within the Simon K Firmware re-flash.
Specs:
- Cont. Current: 40 amps
- Burst Current: 60amps
- Weight: 38g
- Size: L:52.5 x 25.5 x 10mm
- Lipo: 2-6Cells
- Program Device: Not Needed.

MT-40A-OPTO-SK

$49.97
+ Plus Shipping

Qty.
Availability: Good


Maytech 45amp Opto Eagle-Multi ESC with SK FW

MT-45A-OPTO-MK - Maytech 45amp Opto Eagle-Multi ESC with SK FW


New! Maytech Eagle-Multi Series 45amp Opto ESC with Simon K Firmware
New Multi-Copter Series ESC From Maytech
Specs:
- Cont. Current 45amps
- Burst Current (10sec) 65amps
- 2-6 Cells Lipo No BEC
- Size: 52.5mm x 25.5mm x 10mm.

MT-45A-OPTO-MK

$50.50
+ Plus Shipping

Qty.
Availability: Yes


Maytech 45amp OPTO Speed Controller

MT-45A-OPTO-V1 - Maytech 45amp OPTO Speed Controller


Maytech 45amp OPTO ESC Harrier-Supreme V1 Series OPTO Speed Controller

Specs:
- Cont. Current: 45 amps
- Burst Current: 65amps
- Weight: 38g
- Size: L:52.5 x 25.5 x 10mm
- Lipo: 2-6Cells
- BEC: 5.5V/3A Switch Mode
- Program Device: TX/Program Card.

MT-45A-OPTO-V1

$47.97
+ Plus Shipping

Qty.
Availability: Good


MayTech 50amp HV Opto Eagle-Multi ESC with SK FW

MT-50A-OPTO-HV-MK - MayTech 50amp HV Opto Eagle-Multi ESC with SK FW


New! MayTech Eagle-Multi Series 50amp Opto High Voltage ESC with SK Firmware
High Voltage Multi-Copter Series ESC

Specs:
- Cont. Current: 50amps
- Burst Current (10sec) 70amps
- 6-12 cells Lipo No BEC
- Size: 74.5mm x 35mm x 14mm.

MT-50A-OPTO-HV-MK

$123.50
+ Plus Shipping

Qty.
Availability: Yes


Maytech 50amp Opto Eagle-Multi ESC with SK FW

MT-50A-OPTO-MK - Maytech 50amp Opto Eagle-Multi ESC with SK FW


New! Maytech Eagle-Multi Series 50amp Opto ESC with Simon K Firmware
New Multi-Copter Series ESC From Maytech
Specs:
- Cont. Current 50amps
- Burst Current (10sec) 70amps

- 2-6 cells Lipo No BEC
- Size: 66mm x 26.3mm x 13mm.

MT-50A-OPTO-MK

$58.99
+ Plus Shipping

Qty.
Availability: Yes


Maytech 60amp OPTO Speed Controller

MT-60A-OPTO-V1 - Maytech 60amp OPTO Speed Controller


Maytech 60amp OPTO ESC Harrier-Supreme V1 Series OPTO Speed Controller

Specs:
- Cont. Current: 60 amps
- Burst Current: 80amps
- Weight: 51g
- Size: L:52.5 x 25.8 x 14mm
- Lipo: 2-6Cells
- BEC: 5.5V/4A Switch Mode
- Program Device: TX/Program Card.

MT-60A-OPTO-V1

$50.00
+ Plus Shipping

Qty.
Availability: Good


Maytech ESC Programming Card For MT V1 Series ESC

MT-ESC-PROG - Maytech ESC Programming Card For MT V1 Series ESC

Maytech Program Card for Harrier(MT) V1 Series ESC's

Specs:
- Size: 49mm x 30mm
- Weight: 6.5g.

MT-ESC-PROG

$8.97
+ Plus Shipping

Qty.
Availability: Good


MayTech HV UBEC 4-12 Cell Lipo 12v Output

MT-UBEC-12V - MayTech HV UBEC 4-12 Cell Lipo 12v Output


New! MayTech HV UBEC 4-12 Cell Lipo 12v Output

Specs:

Input voltage: 4-12 cell Lipo
Output Voltage: 12v/6A Max 10A
Size: 56mm x 26mm x 22mm
Weight: 42g

MT-UBEC-12V

$23.99
+ Plus Shipping

Qty.
Availability: Yes


Maytech 30amp Opto MultiKopter ESC with Simon K 2-6S

MT30A-OPTO-HS-V2-MK - Maytech 30amp Opto MultiKopter ESC with Simon K 2-6S


New! MayTech MultiKopter 30amp Opto ESC for 2-6S Lipo with Simon K FW
Specs:
- Cont Current 30amps
- Burst Current 40amps
- Size: 56 x 25.7 x 9mm
- Weight: 20g
- Lipo: 2-6S
-Opto No Programming Needed, Just Throttle Calibration.

MT30A-OPTO-HS-V2-MK

$37.50
+ Plus Shipping

Qty.
Availability: Good


Castle Creations Phoenix 25 Brushless Speed Control

PHX-25 - Castle Creations Phoenix 25 Brushless Speed Control
Specifications
• Cells w/BEC 5-10
• Cells w/o BEC 5-16
• Continuous 25 amps
• Surge 40 amps
• Switching Rate 7,000 Hz
• Resistance 0.0065 Ohms
• Brake Yes
• Low Voltage Cut-off Programmable
• Reversible Yes - change any two wires
• Size 1.08 x 0.91 x 0.16 in.
• Weight (with wires) 0.6 oz. (17g)
• Universal Connector

PHX-25

$64.95
+ Plus Shipping

Qty.
Availability: Good


Castle Creations Phoenix-35 Brushless ESC

PHX-35 - Castle Creations Phoenix-35 Brushless ESC
Use the Phoenix-35 when you need more power from your medium sized motors, or are looking for the best brushless controller for your Corona, ECO 8, or Voyager heli. From 3-4 pound sport flyers to helicopters, the Phoenix-35 has the capability and smooth reliability you need.
The Phoenix-35 gives you the flexibility you've come to expect from Castle Creations controllers. With a total of 7 user-programmable features this speed control has it all!

User programmable features include:
Low-voltage cutoff - 4V, 5V, 6V, 7.2V, 9V, 12V
Over-Current Protection - 5 settings
Brake Type - 5 settings
Throttle Range - fixed/self-adjusting/governor
Timing Advance - 3 choices
Cutoff Type - hard or soft
Switching Frequency - 3 choices.

PHX-35

$94.99
+ Plus Shipping

Qty.
Availability: Good


Sky-Hero BL-Heli 20amp Brushless Speed Controller (Fits Anakin/All FPV Racers)

SKH04-014 - Sky-Hero BL-Heli 20amp Brushless Speed Controller (Fits Anakin/All FPV Racers)

New! Sky-Hero BL-Heli 20amp Brushless Speed Controller (Fits Anakin/All FPV Racers)

SKH04-014

$18.00
+ Plus Shipping

Qty.
Availability: Yes


Turngy ESC Programming Card

TNGY-PGM - Turngy ESC Programming Card

Turnigy Speed Controller Programming Card

Compatible with H-Wing, OEMRC and TURNIGY Speed Controllers.
This device plugs inbetween the Rx and the speed controller. It allows the user to program the BESC according to a series of LED indicators. it has buttons at the bottom so you can navigate through the menu and select the feature you want, then change it. Its very simple and is much easier than listening to jingles or a series of beeps.

This item is an excellent addition to your flight kit, especially with the new hard plastic case and lets you quickly change the BESCs settings in the field in a much shorter time and with greater assurance that what you have changed is correct and saved into the BESC.
Compatible with all Hobbywing, Thunderpower, Turnigy and OEMRC Sentilon Speed Controllers.

TNGY-PGM

$16.99
+ Plus Shipping

Qty.
Availability: Good


TURNIGY Plush 10amp 9gram Speed Controller

TR-P10A - TURNIGY Plush 10amp 9gram Speed Controller

TURNIGY Plush 10amp 9gram Speed Controller
The Plush series of ESC are a very good quality controller with a broad range of programming Features.
Smooth linear Throttle Response.
Features:
Cont. Current: 10A
Burst Current: 12A
BEC Mode: Linear
BEC: 5V/2A
Lipo Cells: 2-4
Weight: 9g
Size: 27x17x6mm
User Programmable, both via controller and optional programming card. The programming card is an excellent item as it instantly tells the user the current settings and with a few simple clicks of the buttons, the user can change the settings and have graphical reassurance of those changes.

TR-P10A

$13.00
+ Plus Shipping

Qty.
Availability: Good


VulcanUAV Multi-ESC Programming Tool

V-ESC-01 - VulcanUAV Multi-ESC Programming Tool

VulcanUAV Multi-ESC Programming tool.

V-ESC-01

$12.99
+ Plus Shipping

Qty.
Availability: Yes

© AddictiveRC LLC - All Rights Reserved | Website Development and Design by TYCOMM.NET