New! AeroXcraft Hero3 Brushless Gimbal Factory Built Version with Silicone Gel Vibration Isolator Upgrade set
Direct drive brushless gimbal for GoPro Hero3. This Gimbal Fully assembled and ready to use Brushless Camera Mount.
Includes: - All CNC Machined Parts - Quality hardware pack. - Brushless Gimbal Motors (2). - Brushless Gimbal Controller. - Rail Mounts for AeroXcraft Rail System. - Rubber Vibration Isolators.
Options: - Droidworx and X650 Rail Mountings. - Silicone Gel Vibration Isolators Included! - Factory Assembled. To Follow: - Hero 1 & 2 Version - DJI Phantom Version. - Weight: 180 grams.
New! AeroXcraft Hero3 Brushless Gimbal Fully Built for DJI-Phantom
- New! AeroXcraft Hero3 Brushless Gimbal Fully Built for DJI-Phantom
New! AeroXcraft Hero3 Brushless Gimbal Factory Built Version with Silicone Gel Vibration Isolator Upgrade set for DJI-Phantom RTF
This gimbal is specifically designed for the DJI Phantom. The gimbal fits within the confines of the Phantom landing gear, whilst ensuring a clear field of view and maintaining the Phantoms center of gravity. No modifications to your Phantom are required.
Included with this gimbal are top quality Silicone Gel Vibration Isolators. These keep the 'jello' inducing vibes in check, but also keep the gimbal secure and stable.
Includes: - Fully assembled and tested gimbal - All CNC machined parts - Quality hardware - Fixings to attach the gimbal to your Phantom - Brushless Gimbal Motors - Brushless Gimbal Controller - Silicone Gel Vibration Isolators - Power cable - Tilt Control Cable
Notes: Gimbal can be configured with the motor on either side of the GoPro to allow use of the USB port OR to have a lens position central with the roll axis. Gimbal configured for use with Phantom Power Extension cable. No need for any additional batteries or BEC.
Gimbal weight including motors 190 grams. Gimbal weight inc. motors, phantom mount, controller: 216 grams. DJI Phantom and GoPro Camera NOT included! Camera housing is for the GoPro Hero 3 camera ONLY. Designed and Manufactured in the UK, exclusively by Aeroxcraft.
aeroXcraft Landing Gear Set For DJI-F550 Frame
- aeroXcraft Landing Gear Set For DJI-F550 Frame
New! aeroXcraft Landing Gear set For DJI-F550 Fame This Landing gear set allows you to use the Aeroxcraft GoPro Gimbal underneath and out front of your DJI F550 hexa. Your Lipo batteries are used as counterweights to balance the forward position of the camera gimbal. The included battery mounts also have a bracket for the DJI-LED Module.
No modifications to your DJI F550 are required to attach the gear. Just bolt on using the supplied fittings and off you go.
Kit Includes: - All hardware and fittings required for assembly and attachment. - Velcro Straps to secure lipo batteries. - CNC G10 and Aluminium frame parts - Comprehensive Assembly instructions. - Adapter for GoPro Gimbal.
Specs: - G10 and aluminium construction. - Weight: 170g
Notes: - Assembly required. Full instructions included. - DOES NOT INCLUDE MOTORS, WIRING, ELECTRONICS OR RADIO - GOPRO GIMBAL NOT INCLUDED. - Designed and Manufactured in the UK by AeroXcraft Ltd. Also can be modified to Fit F450 Frame Too!
aeroXcraft GoPro Camera Mount
- aeroXcraft GoPro Camera Mount
New! aeroXcraft GoPro Camera Mount The Aeroxcraft GoPro Tilt Roll Gimbal provides smooth GoPro camera stabilisation for your multirotor. Designed for the Futaba S3156 and Hitec HS-65/HS-5065 series servos.
Your GoPro camera fits snuggly into a foam lined case to protect it from knocks and scratches. Also the GoPro lens cover from your plastic GoPro case can be fitted to the Aeroxcraft gimbal to protect the lens on the camera.
This gimbal bolts straight onto the Aeroxcraft Quad670 quadcopter payload rail or can be attached to other brands of multirotor using the optional adapters.
- Anti-vibration mountings - Roller bearings for a smooth action. - All hardware and fittings. - A2 Stainless screws and nuts. - G10 frame parts. - Assembly instructions. - Weight: 125grams (not including servos).
Notes: - Assembly required. Full instructions included. - DOES NOT INCLUDE SERVOS OR GOPRO CAMERA - Use Futaba S3156 servos with the DJI Wookong M flight controller. - For Futaba S3156 we recommend using servo horns, Align part HSP41003. - Designed and Manufactured in the UK by AeroXcraft Ltd.
aeroXcraft Quad-670 Air Frame Kit
- aeroXcraft Quad-670 Air Frame Kit
New! aeroXcraft Quad-670 Multicopter Kit Designed primarily for use with the DJI Wookong M, the Aeroxcraft Quad-670 has a dedicated place for all the major WKM components. Under the dome the controller plate has places for the Main Controller, IMU, PMU and for your radio RX. On the rear of the frame is a place to mount your DJI GPS/Compass unit, with the ability to fine tune it's direction. Under the Quad, on the rear battery plate there is a mounting bracket for the DJI LED unit, which solves the problem of seeing the unit whilst in flight.
Not everyone wants to use the DJI WKM, luckily the Quad-670 will work with any other suitable multirotor controller. There is a custom mounting plate available for the Aeroquad Sheild 2.0. Contact us if you require this.
This quad was designed to compliment the Aeroxcraft GoPro Gimbal. The GoPro Gimbal sits right out front allowing your GoPro HD to take great footage without getting the Quad-670 in shot. The flight batteries are use to counter balance the weight of the camera allowing you to make sure the center of gravity is in the correct place.
The motor mounts will take motors up to 35mm in diameter, including Axi 2814/22 and Park480 1020kv.
Specifications: - 670mm span (motor to motor) - G10 frame and aluminium booms. - All hardware included. - Bare frame weight, inc dome cover and Landing Gear: 720g
Includes: - All hardware and fittings. - A2 Stainless screws and nuts. - CNC G10 and Aluminium frame parts - Comprehensive Assembly instructions.
Example of a typical setup: DJI Wookong M Avroto 770Kv Motors Graupner Elektro Props - 11x5 2x ZIPPY Flightmax 4000mAh 3S1P 20C lipo batteries GoPro Gimbal All up weight including batteries and camera 2700g. Flight time 12 minutes.
Notes: - Full spares backup. - Assembly required. Full instructions included. - Gimbal not included - DOES NOT INCLUDE MOTORS, WIRING, ELECTRONICS OR RADIO - Designed and Manufactured in the UK by AeroXcraft Ltd.
New! AeroXcraft F550 LG Vibration Dampening Kit
- New! AeroXcraft F550 LG Vibration Dampening Kit
New! Vibration Isolator Kit For F550 Landing Gear Kit
This kit isolates the Aeroxcraft F550 Landing Gear from the frame of the F550. Includes all hardware needed and no modifications are required to your F550 frame and comes with Rubber Isolators.
New! aeroXcraft New Hero3 Gimbal Professional gimbal for use with GoPro Hero 3, Hero 2, Hero and Wi-fi BacPac. Belt driven axes for fast and smooth stabilisation. Comes fully built including modified Savox SH1257MG servos.The servos are modified for 360 degree rotation and use external potentiometers. Your GoPro camera is protected in a G10 laminate cage with polyurethane impact buffers rather than using the heavy and cumbersome clear case supplied with the camera. It is an effective balance between camera protection, weight and gimbal performance. Mono arm design allows full access to ports and memory cards and can be configured to suit your needs. FEATURES: - Housings for GoPro Hero 3, Hero 2, Hero and Wi-fi BacPac (OPTION) - Camera protected in G10 cage with polyurethane impact buffers. - 2 versions: 2 axis (tilt/roll) or 3 axis (tilt/roll/pan). - Belt driven on all axes. - External pots on tilt and roll. - 360 deg movement on all axes (Depending on choice of potentiometers). - Can be configured with the roll arm on the left or right, depending on your requirements. - Mountings for HoverflyGimbal (Note: HoverflyGimbal controller not included). - Compatible with DJI Naza and Wookong M controllers. - Weight: 300 grams including servos and GoPro housing.
Please Choose the Following in the order notes upon check out: - Hero2 or Hero3 - WiFi BacPac (hero and Hero2) - Rail Mounting Choices: AeroXcraft, DroidWorx, X650.